Measures before operating
Measures before operating
1 Perform daily service, see page 155. (Make sure that the
coolant has required freezing protection in cold weather and
that the lubrication oil is intended for use in winter.)
2 Clean/scrape the windows.
3 Check that there are no faulty/loose parts or leaks which can
cause damage.
4 Check that the battery disconnect switch is switched on.
5 Check that the steering frame joint lock has been disconnected.
6 Check that the wheels are not blocked.
7 Check that engine hood and guard plates are closed.
8 Check that there are no persons in the vicinity of the machine,
see page 57.
9 Adjust the operator seat (see page 50) and the steering wheel
(see page 45).
10 Fasten the seat belt.
11 Check that there is sufficient fuel in the tank.
After operating
Fill the fuel tank, as this will counteract the formation of
condensation water.
Operating instructions
61