Service And Maintenance - Volvo A35E Operator's Manual

L52168B
DELIVE VERY
INSTRU INS RUCTIONS NS
Machines manufactur ed by
Construct ion Equipment
Volvo Construc tion Equipment
Machine mo del Serial no.
Delivery instruction carried out on the
The inspection programme "Delivery Instructions" is to be used for checking the machine with the customer/owner and for presenting the
machine to the customer/owner.
Please pay atten tio n to the safety an d en viron mental ins truc tio ns in Op erator´s and Service Man uals for
th e mach in es conc erned.
Performing, sign ing and submitti ng the delivery inst ruct ions is a pre-condit ion for a valid
ARRIVAL AN AR L AND
machine warrant y.
DELIVERY I I NSPECTI TION ON
1 Check together with the owner/operator that the delivered machine corresponds to the order.
Machines manufactur ed by
Construct ion Equipment
Volvo Construc tion Equipment
2 Presentation of the machine including optional equipment.
Arrival date Delivery date
Machine Model Serial no. Operating hours
Review o f the Operator 's Manual with e mphasis on the following point s.
(Depending on machine type, certain points are omitted.)
Arriv al inspection by Delivery inspection by Dealer
3 Opera tion
The inspection programme "Arrival and Delivery Inspection" is to be used as a check on a machine upon its arrival from the factory and for an
inspection before its delivery to the customer. – Running-in instructions.
– Cab, instruments and operating controls.
Please pay atten tio n to the safety an d en viron mental ins truc tio ns in Op erator´s and Service Man uals for
th e mach in es conc erned. – Contronic functions.
MAINTENANCE OF MAINTENANCE OF
– Start/stop, warming up.
STORED MACHINES STORED MACHINES
Arri val inspection
The arrival inspection is the first check of the product after transport. – Transmission, shifting gears.
Machiines manufactured by
Construct ion Equipment
Volvo Construc tion Equipment
– Retarder function.
1 Any deviations or transport damage must be reported to the carrier, and then immediate correc-
tive actions must be taken.
Customer no. Pa ge
Machine mo del Serial no. Owner – Service brakes and parking brake.
1 (2)
2 Check that the machine is equipped according to the order confirmation, and that tools and man-
– Steering, secondary steering.
Delivery instruction carried out on the Operator (Recipient) uals are supplied with the machine. Any deviations should be reported to the sales department.
– Operator environment, heating, ventilation and air conditioning.
3 Check that no caps for the oil filler points, fuel tanks, radiator or expansion tank are missing, in
The inspection programme "Delivery Instructions" is to be used for checking the machine with the customer/owner and for presenting the incorrect position or broken. When applicable, check that no caps for the brake, clutch fluid reser- – Attachment bracket (attaching an attachment) and use of attachments.
machine to the customer/owner.
voirs and washer fluid are missing.
– Loading, digging, dumping, lifting and grading operations.
4 As soon as possible after the machine has been transported it should be washed with fresh water.
Please pay atten tio n to the safety an d en viron mental ins truc tio ns in Op erator´s and Service Man uals for
– Operation on a public road.
th e mach in es conc erned.
5 After the inspection, the anti-corrosion treatment of the machine should be renewed. If it is to be
– Towing.
stored again for a longer period, follow the instructions in "MAINTENANCE OF STORED
Performing, sign ing and submitti ng the delivery inst ruct ions is a pre-condit ion for a valid
MACHINES".
– Tyre pressure.
machine warrant y.
Perfo rmed
Delive ry inspe ction
4 Service, maint enance
1 Check together with the owner/operator that the delivered machine corresponds to the order. The delivery inspection is a check before the product is delivered to the customer.
Engine, cooling system and fuel system.
2 Presentation of the machine including optional equipment.
6 Check the engine coolant level and the oil level in the engine, transmission, axles and hydraulic
system. Check the freezing point of the coolant. When applicable, check the level in all brake fluid Electrical system including battery state of charging and starting with booster batteries (jump start-
reservoirs. Check the water level in the windscreen washer system. See the Operator's Manual. ing).
Review o f the Operator 's Manual with e mphasis on the following point s. Note: Do not start engine with battery charger connected.
(Depending on machine type, certain points are omitted.) 7 Remove transport protection from the hydraulic cylinders. Perfo rmed
Power transmission / axles.
Clean any anti-corrosion agent from the piston rods.
3 Opera tion
Brake system.
8 Check and adjust tyre pressure or on excavators check the track slack adjustment.
– Running-in instructions.
9 Start the engine and run the machine until normal operating temperature has been reached.
– Cab, instruments and operating controls.
Check that the following systems function normally:
Volvo Construction Eq uipment Customer Suppo r t AB
– Electrical system: Check that instruments, control lamps and other lights are working. SE-631 85 Eskilstuna
– Contronic functions.
Sweden
– Brake system: Test the service brakes, parking/emergency brakes and engage the retarder
– Start/stop, warming up. (where applicable).
– Steering system: Turn the steering wheel to both full steering lock positions. When applicable,
– Transmission, shifting gears. check electrical secondary steering function. On Motor Graders, lean the front wheels left and
right.
– Retarder function.
– Hydraulic system: Run all hydraulic cylinders to their respective end position.
– Service brakes and parking brake. Check all equipment and functions.
– Steering, secondary steering. 10 Check that there are no fuel, water or oil leaks. If necessary, check-tighten connections, clamps
and fittings.
– Operator environment, heating, ventilation and air conditioning.
11 Any malfunctions or defects must be corrected, noted and reported to the supervisor.
– Attachment bracket (attaching an attachment) and use of attachments.
See page 2.
– Loading, digging, dumping, lifting and grading operations.
12 Turn off the battery disconnect switch.
– Operation on a public road.
Volvo Construction Eq uipment Customer Suppo r t AB Pleas e send com ments abou t the Inspectio n Programm e to
– Towing.
SE-631 85 Eskilstuna sp@ volvo.com
Sweden
– Tyre pressure.
4 Service, maint enance
Engine, cooling system and fuel system.
Electrical system including battery state of charging and starting with booster batteries (jump start-
ing).
Note: Do not start engine with battery charger connected.
Power transmission / axles.
Brake system.
Volvo Construction Eq uipment Customer Suppo r t AB Please s e nd comm ents about the Inpecti on Programm e to
SE-631 85 Eskilstuna sp@volvo.com
Sweden

Service and maintenance

For the machine to function satisfactorily and at lowest possible
cost, a thorough maintenance is required.
Lubrication and service chart
The section "Lubrication and Service Chart" describes the
maintenance work, which the operator can carry out. If certain
operations require trained workshop personnel and special
equipment, this will be indicated. See "Lubrication and service
chart" page 155.
Service history
After every completed service at an authorised workshop, the
Service History shall be filled in, see page 195. The Service
History is a valuable document that can be referred to, e.g., when
selling the machine.
Arrival and delivery inspection
Before the machine leaves the factory, it is tested and adjusted.
The dealer must also, if the warranty is to apply, carry out "Arrival
and delivery inspections" according to applicable form, which must
be signed.
Owner Customer no. Pa ge
1 (2)
Operator (Recipient)
Delivery instructions
Perfo rmed
Pa ge
1 (2)
Perfo rmed
When handing the machine over, the dealer must give the buyer
"Delivery instructions" according to applicable form, which must be
Perfo rmed
signed, if the warranty is to apply.
Service programmes
Perfo rmed
The Service Programme should be used in connection with
Please s e nd comm ents about the Inpecti on Programm e to
sp@volvo.com
warranty inspections and during maintenance carried out by an
1015444 authorised dealer workshop.
The intervals recommended between checks, oil changes and
lubrication apply provided that the machine is used under normal
environmental and operating conditions.
Warranty inspection
Two Warranty Inspections should be carried out at an authorised
dealer workshop. The first within 100 operating hours and the
second at the latest at 1000 operating hours.
The carrying out of these warranty inspections is a condition for the
warranty to apply.
During these inspections, oil and other liquids have to be changed
before the end of the regular intervals.
Maintenance
Regarding intervals for other maintenance, see the Service
Programme or the Lubrication and Service Chart in this section.
Service and maintenance
101