Ce Marking, Emc Directive - Volvo A35E Operator's Manual

Presentation

CE marking, EMC directive

9
CE marking, EMC directive
CE marking
(The Declaration of Conformity only applies to machines
marketed within the EU/EEA).
This machine is CE marked. This means that when delivered the
machine meets the applicable "Essential Health and Safety
Requirements", which are given in EU's so-called Machine Safety
Directive, 98/37/EC.
Any person carrying out changes that affect the safety of the
machine, is also responsible for the same.
L64437A
As proof that the requirements are met, the machine is supplied
with an EU Declaration of Conformity, issued by Volvo CE for each
separate machine. This EU declaration also covers attachments
manufactured by Volvo CE. The documentation is a valuable
document, which should be kept safe and retained for at least ten
years. The document should always accompany the machine
when it is sold.
If the machine is used for other purposes or with other attachments
than described in this manual, safety must at all times and in each
separate case be maintained. The person carrying out such action
is also responsible for the action which, in some cases, may
require a new CE marking and the issue of a new EU Declaration
of Conformity.
The EU EMC Directive
The electronic equipment of the machine may in some cases
cause interference to other electronic equipment, or suffer from
external electromagnetic interference, which may constitute safety
risks.
The EU EMC directive about "Electromagnetic compatibility",
2004/108/EC, provides a general description of what demands
can be made on the machine out of a safety point of view, where
permitted limits have been determined and given according to
international standards.
A machine or device which meets the requirements should be CE
marked. Our machines have been tested particularly for
electromagnetic interference. The CE marking of the machine and
the declaration of conformity also cover the EMC directive.
If other electronic equipment is fitted to this machine, the
equipment must be CE marked and tested on the machine with
regard to electromagnetic interference.