Taking A Reading (Measuring/Recording Measurements) - Panasonic DIAGNOSTEC EW-BU55 Operating Instructions Manual

Taking a reading (Measuring/Recording measurements)

Please start taking a reading under the condition that the power is off.
Start
Finish
Memory
(BU55)
●
BU55 can store measurement values for two people (270 measurements per person).
●
BU35 can store one person's measurements (270 measurements).
● When exceeding 270 stored measurements, stored data will be overwritten,
beginning with the oldest data.
1.
Press
After the entire display has been lit, the cuff
will be pressurized and measurement will be
taken automatically.
●
The pressure value and the time will be
displayed.
●
The mark will flash when pulse is
detected during pressurization.
After the measurement is completed, the
blood pressure value and pulse rate will be
displayed.
●
" " and the graph " " are blinking.
For how to see the graph, refer to page 16.
● According to the measurement result,
safety/warning marks may be displayed.
For details, refer to page 11, 12.
2.
To store the measured values.
(1) Press
(2) press
● " " will go from flashing to being
steadily lit.
●
The memory number, measurement date,
and time are alternately displayed.
●
If you do not press
will shut down automatically after approx.
5 minutes.
3.
To complete the measurement, press
HOW TO USE
.
to select the desired user. (BU55)
.
, the unit
.
10