Taking A Reading (Measuring/Recording Measurements) - Panasonic Diagnostec EW-BU1 Operating Instructions Manual

Taking a reading (Measuring/Recording measurements)

Please start taking a reading under the condition that the power is off.
Start
Finish
Memory
● This unit can store a maximum of 90 measurement values.
● When exceeding 90 stored measurements, stored data will be overwritten,
beginning with the oldest data.
1.
Press
After the entire display has been lit, the cuff
will be pressurized and measurement will be
taken automatically.
● The pressure value and the time will be
displayed.
●
The mark will flash when pulse is
detected during pressurization.
After the measurement is completed, the
blood pressure value and pulse rate will be
displayed.
●
" " is blinking.
● According to the measurement result,
safety/warning marks may be displayed.
For details, refer to page11,12
2.
To store the measured values,
press
● " " will go from flashing to being
steadily lit.
●
The memory number, measurement date,
and time are alternately displayed.
● If you do not press
will shut down automatically after approx.
5 minutes.
3.
To complete the measurement, press
HOW TO USE
.
.
, the unit
.
10