BEFORE USE
Setting the time and date
*
Please start setting the date and time under the condition that the power is off .
*
Please be sure to set the date and time before taking the fi rst measurement after
purchasing the blood pressure monitor or after changing the batteries.
*
During setting, if no button is pressed for 5 minutes or more, the clock will be
displayed as "-:--", and the power will be off without saving any settings. It is also
possible to perform measurement and recording even under this circumstance.
However, the record will not include any time information.
Adjust the fl ashing numbers
sequently
"year"
"month"
mm/dd
"date"
"hour"
"minutes"
7
Adjust numbers
Hold
1.
2.
3.
4.
Hold
(for 3 seconds or longer).
"year (2011)" will fl ash.
Adjust the "year".
(1) Press
to set the desired number.
(2) Press
setting.
●
Setting range for years is from 2011 to
2050.
Adjust the "month" --> "date" --> "hour" -->
"minutes" by repeating procedures in step
2.
Press
settings.
●
This setting cannot be completed by
pressing
the "hour" and "month". Be sure to press
after adjusting the "hour"
and "month" to complete settings.
●
The set time will disappear after 5 seconds.
*
To reset, perform the procedures in
step 1. to 4.
Complete setting
to complete the
to complete the
before adjusting