Lt And Aux Menus - Epson EPL-N1200 User Manual

Serial menu items
Menu item
Word Length
Baud Rate
Parity
Stop Bit
XOn/XOff
DTR
Buffer Size

LT and AUX Menus

The LT menu appears only when you have installed the
LocalTalk/Serial module (described in Chapter 4) and have set
the Emulation menu to LT (see page 3-10). The AUX menu is
available only when you have installed a Type B interface.
Both menus have one menu item, Buffer Size, that sets the
memory allocation used for the optional interface. You can set
it to Maximum (more memory allocated for receiving data),
Minimum (more memory allocated for printing data), or
Normal (for balanced usage); Normal is the default.
3-16
Using the Control Panel
Description
Selects a 7- or 8-bit word length
Sets the baud rate (communication speed); 9600 is the
default
Enables or disables parity checking for error detection;
None is the default
Sets the number of stop bits to send at the end of each
character sent to the printer; 1 is the default
Sets the XOn/XOff protocol to On, Off, or Robust (sends
an XOn signal when the printer is ready for data); used
with the DTR menu item below
Turns the DTR (data terminal ready) protocol on or off;
used with the XOn/XOff menu item above
Sets the memory allocation used for the optional serial
interface: Maximum (more for receiving data),
Minimum (more for printing data), Normal (balanced
usage)