Epson EPL-N2000 User Manual page 144

R
Remote Control Panel, 2
Removing
Duplex Unit, 4-19 to 4-21
EPSONScript Level 2 module,
4-25
memory modules, 4-25
Reset key sequence, 3-4
Resolution
setting in printer driver, 2-6, 2-7
setting on control panel, 3-12
RITech
adjusting the RITech setting, 5-5 to
5-7
setting in printer driver, 2-10
setting on control panel, 3-6, 3-13
S
Safety instructions, 8 to 14
SelecType
button, 3-3
changing settings, 3-7 to 3-9
problems using settings, 6-17
using, 3-7 to 3-24
SelecType modes, 2
Serial
cable specifications, 4-5
handshaking, A-9
installing a LocalTalk/Serial
module, 4-5 to 4-10
installing a serial interface card,
4-10 to 4-12
settings, A-8
using a serial interface card, 4-12
to 4-14, A-8 to A-11
Serial menu, 3-17
Service, 5 to 7
Settings
baud rate, 3-17
binding, 3-12
changing printer driver, 2-4 to 2-6
changing SelecType, 3-7 to 3-9
changing serial printer, 3-17
changing to factory defaults, 2-13,
3-4, 3-16
copies printed, 2-9, 3-12
current printer settings, obtaining,
3-9
duplexing, 2-9, 3-12
halftone, 2-7
LocalTalk, 3-18
manual feed, 3-12
matching serial settings for
computer and printer, 4-12
page orientation, 2-6, 3-12
page size, 2-6, 2-9, 3-6, 3-12
paper source, 2-6, 2-8, 3-6, 3-12
paper type, 3-14
print resolution, 2-6, 2-7, 3-12
printer memory, 2-11
problems using SelecType or
Remote Control Panel, 6-17
RITech, 2-10
standby mode, 2-11, 3-15
Time Out, 2-11, 3-15
toner density, 2-10, 3-13
toner remaining, 3-16
Toner Save, 2-11
user-defined group settings, 2-13
Setup menu, 3-15
Specifications
Duplex Unit, A-14
electrical, A-5
environmental, A-4
Ethernet card, A-15
imaging cartridge, A-14, A-15
lower paper cassettes, A-11 to
A-13
mechanical, A-4
printer, A-3
Standby mode setting, 2-11, 3-15
Index IN-5