N.B. This equipment must be installed by a competent person. Aluminium Rollator 120kg weight limit Do not exceed the weight limit stated - doing so could put the user at risk. BEFORE USE • Carefully remove all packaging. Avoid using any knives or other sharp instruments as this may damage the surface of the product.
Page 3
ASSEMBLY INSTRUCTIONS Carefully remove all packaging, including the cardboard tubes covering the knurled tube part of the brake assembly. Check the product thoroughly for damage or obvious faults. If you suspect the unit to faulty, please do not use, but contact your supplier immediately for service.
Page 4
Assembly procedure: Step 1: Install front wheel into receptacle located on the front of the frame. The red buttons pop up when the wheel securely in place. Repeat step 1 to attach the second front wheel. (see fig. 1) fig.1 Step 2:...
Page 5
Step 4: Slide the canvas tabs of the shopping bag onto the hooks located on the sides of the seat . Use the longer ‘hook and loop’ canvas straps to attach the bag to the uprights of the main frame (see fig.4) fig.
OPERATING THE BRAKES 1. To stop, gently apply a gripping pressure to both brakes simultaneously ( fig. 12), this will slow down and stop your rollator. fig. 12 2. The brakes on your rollator have a park option (fig. 13). To operate the park option, push downwards both...
Page 7
REISSUE If you reissue or are about to reissue this product, please thoroughly check all components for their safety. This includes: • Bent or damaged tubes or cracks at the tube joints. • Loose or worn horseshoe clips • Elongated adjustment holes. •...
CLEANING Clean your rollator using a non-abrasive cleaner or mild detergent with a soft cloth. Abrasive cleaners e.g. AJAX and/ or abrasive cleaning pads may seriously damage the product beyond repair and should not be used. Always ensure that you wipe dry the equipment after cleaning.