Epson EPL-7500 User Manual page 165

Problem
Paper feeds
crookedly or jams
(continued).
Printed pages curl
too much and are
not placed in the
output tray
properly.
CAUTIONS:
When you press the RESET button, any data
remaining in the printer is lost.
If you continue to print using paper that is smaller
l
than the size of paper set with your software, toner
may accumulate on the drum and damage the
imaging cartridge. Make sure you set the PAPER SIZE
setting to match the paper you are using.
Troubleshooting
7-26
Solution
Your paper may be moist or damp.
Printing is sensitive to moisture absorbed
by the paper. Do not store your paper in a
humid or damp environment.
You may not be using the correct type of
paper for your printer. Smooth, high-
quality copier paper is recommended for
best results. See Chapter 4 for more on
choosing paper.
Most paper has a natural "curl" that may
be emphasized when the paper is run
through a laser printer. Turn the stack of
paper over in your paper cassette and try
printing again.
Use the optional face-up output tray,
which provides a straight-through paper
path, preventing excessive curling. To
select face-up printing, install the face-up
tray, move the paper path selector to the
FACE UP position, and set the OUTPUT
option in SelecType Level to FACE UP.
1