Removing Smps Pcb - Samsung NV51K6650D Service Manual

3. Disassembly and Reassembly

3-4 Removing SMPS PCB

WARNING
Disconnect power before servicing the oven Replace all panels before operating oven . Failure to do so
can result in death or electrical shock .
PRECAUTION
When you work on the electric oven, be careful when handling the sheet metal parts . Sharp edges may
be present, and you can cut yourself if you are not careful .
Parts
SMPS PCB
(ASSY
MODULE;
DA92-00675A)
* Reassembly of All part is the reverse order of disassembly .
This document can not be used without Samsung's authorization.
Explanation Photo
11
Explanation
1. Turn off the electrical supply going
to the oven .
2. Pull the oven away from the wall
so that you can access the upper
panel .
3. To remove upper cover (See step 3
on 3-3)
a) remove 2 screws from upper
cover on the left and right side
b) remove 3 screws from from the
back of upper cover .
4. There is 1 SMPS PCB (printed
circuit board) on the top of the oven .