Disassembly And Reassembly; Preparing Remove The Assy-Frame Wall Oven; Removing Cover-Back Main Wire - Samsung NV51K6650D Service Manual

3. Disassembly and Reassembly

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the oven . Replace all panels before operating oven . Failure to do so
can result in death or electrical shock .

3-1 Preparing remove the Assy-Frame Wall oven

Item
Screw driver Use for assembly and disassembly of all screws
Tubing Wrench Use for assembly and disassembly of tubing to the burner cup
Use for assembly and disassembly of injector nozzles .
7mm Vox Driver
(Cooktop/Broil/Bake burner)
Use for assembly and disassembly of injector nozzles .
9mm Vox Driver
(Convection Fan)

3-2 Removing Cover-Back Main Wire

PRECAUTION
When you work on the electric oven, be careful when handling the sheet metal parts . Sharp
edges may be present, and you can cut yourself if you are not careful .
Parts
Cover-Back
Main wire
* Reassembly of All part is the reverse order of disassembly .
This document can not be used without Samsung's authorization.
How to use
Explanation Photo
9
Pictures
Explanation
1. Turn off the electrical supply going
to the oven .
2. Pull the oven away from the wall so
that you can access the rear panel .
3. Remove 29(Upper back 16, Lower
back 14) screws from the Cover-
Back Main Wire and remove the
panel .