Table of Contents
Advertisement
Maintaining your appliance
Removing the oven doors
CAUTION
•
The door is very heavy. Be careful when removing and lifting the door.
•
Use two hands to remove an oven door. For double ovens, repeat the process
for each door.
A
A.
Wire Harness
62 English
1.
Prior to removing the oven door, prepare
a surface where you will place it. This
surface should be flat and covered with a
soft blanket. You can also use the corner
posts from your packaging material.
2.
Remove the rubber cap and then
disconnect the LED light's Wire Harness
from the bottom right of the door.
B
A
A.
Oven door hinge lock in
locked position
B.
Oven door hinge lock in
unlocked position
3.
Open the oven door.
4.
Locate the oven door hinge locks in
both corners of the oven door, and then
rotate the hinge locks toward the oven
door to the unlocked position. If the
door hinge lock is not rotated fully (see
illustration B on the left for an example
of full rotation), you will not be able to
remove the door properly.
5.
Partially close the door to engage the
door latch locks. The door will stop at
this point.
6.
Using two hands, grasp the edges of
the oven door. Lift and pull the oven
door toward you and remove. You may
need to gently shift the door from side
to side as you pull.
7.
Set the oven door aside on the
prepared covered work surface with the
oven door resting on its handle.
Advertisement
Table of Contents
