Removing Gasket-Door - Samsung NV51K6650D Service Manual

3. Disassembly and Reassembly

3-18 Removing Gasket-Door

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the oven . Replace all panels before operating oven . Failure to do so
can result in death or electrical shock .
PRECAUTION
When you work on the electric oven, be careful when handling the sheet metal parts . Sharp edges may
be present, and you can cut yourself if you are not careful .
Parts
Gasket door
* Reassembly of All part is the reverse order of disassembly .
This document can not be used without Samsung's authorization.
Explanation Photo
26
Explanation
1. Open the oven door to its fully down
position .
2. Pull the ends of the gasket out of
the liner holes .
3. Pull the oven door gasket clips out
of the holes until all of the clips are
removed .
Note . When you install the new
gasket, make sure that all of
the clips are seated in their
liner holes, and that the ends
of the gasket are pushed
fully into their holes . Use the
pointed end of a pencil to
push the gasket ends into the
holes .