3. Disassembly and Reassembly
3-9 Removing Heater-Broil
WARNING
Disconnect power before servicing the oven . Replace all panels before operating oven . Failure to do so
can result in death or electrical shock .
CAUTION
When you work on the electric oven, be careful when handling the sheet metal parts . Sharp edges may be
present, and you can cut yourself if you are not careful .
Parts
Broil
* Reassembly of All part is the reverse order of disassembly .
This document can not be used without Samsung's authorization.
Explanation Photo
16
Explanation
1. Turn off the electrical supply going
to the oven .
2. Open the oven door and remove the
racks from inside the oven .
3. Remove oven from its mounting
location and remove the rear cover .
4. Remove 3 wires from the broil
element and 2 nut with cutting
insulation .
5. Remove 1 screw that are securing
the broil element to the cavity .
6. Remove the broil element .