Epson EPI-4000 User Manual page 87

SelecType Menus and Options
Menu b: Interface
This menu gives you two options for the interface setting: parallel or
serial. The factory setting is b0: parallel interface. If you choose to
install an optional interface board,
parallel whether the board is for
because all optional interface boards use the printer's internal
parallel connections. The serial option is for use with the printer's
internal RS-232C serial interface only.
Option
0
1
Menu C: Baud Rate
This menu appears only after you set the RS-232C serial interface
option. You can use this menu to select a baud rate for serial
communications. See your computer manual and software
documentation for the proper setting. The factory setting with the
RS-232C interface is C0: 19,200 baud.
Option
0
1
2
3
4
5
6
Using the Printer
2-20
a
Setting
Parallel interface
Serial interface (RS-232C)
Setting
19200
9 6 0 0
4800
2400
1200
600
300
sure this menu is set to
make
serial or parallel interface. 'This is