Carrier Fireye NXTSD507HD Installation And Operation Manual page 38

Export
Screen captures saved can be exported to USB or deleted from this screen. Press the USB icon to save to a
connected USB. Press the EJECT icon to unmount the USB before removal. The status of the USB save
operation is noted in the status message.
The exported image files will be saved to the USB drive in the path FireyeHMI\Export\xxx.jpg, where
xxx is a date/time stamp yyyymmddhhmmss followed by the device name and then the screen name. An
example of a file name would be 20210721213553_NXF_OVERVIEW.jpg.
Backup Configuration
The device configuration can be saved to a USB file. The file will be saved in the path
FireyeHMI\Backup.cfg.
The backup file can be used to restore a known configuration by copying the file Backup.cfg to a USB
drive with the path FireyeHMI\Backup.cfg. If this file is present during the startup sequence, it will be
loaded. Note that this file will be erased from the USB drive after it is copied to memory.
Eject USB Drive
Selecting this option will unmount the USB drive and prompt that it is safe to remove. This is preferred
over simply removing the drive, which may corrupt data or cause failure to recognise USB drives.
38 © 2021 Carrier