Advertisement
e 2
5. Using your ISIS Breast Pump with
the AVENT Feeding Bottle
Simply replace the AVENT VIA Cup and Adaptor with
the AVENT Feeding Bottle. To make the pump completely
stable insert the bottle into the funnel cover (a).
6. How to assemble your AVENT
ISIS Breast Pump
Separate all parts and ensure pump has been cleaned and sterilised
as in section 3:
1) Wash your hands thoroughly. Click the white star valve (g) into the
pump body (f) from underneath making sure the flat side of the
valve is downwards and the star side is facing up.
e
2) Place the pump body (f) onto the VIA Adaptor (h). Twist gently
clockwise until it catches.
3) Place the assembled pump body and VIA Adaptor onto the VIA Cup (i).
r
Twist gently clockwise until it catches.
/
4) Place the silicone diaphragm with stem (d) into the pump body (f).
using
Make sure it fits securely around the rim by pressing down with your
main
fingers to ensure a perfect seal. (This is easier if assembled while wet).
he
5) Place the forked end of the handle (e) under the diaphragm stem
(d) and push down gently on the handle until it clicks into place.
6) Carefully insert the let-down massage cushion (b) into the pump
funnel (f) making sure it is perfectly sealed all round the rim of
the funnel. (This is easier if assembled while wet).
7) Click the pump cover (c) onto the pump body (f). To make the pump
completely stable, insert the VIA cup into the VIA lid/stand (j).
All manuals and user guides at all-guides.com
DO NOT OVERTIGHTEN!
DO NOT OVERTIGHTEN!
UK
3
Advertisement
