Advertisement
Available languages
Available languages
Replacing the system outer foil
1. Press the foil frame release
buttons and lift the outer foil
section upwards.
2. Press the system outer foil
release buttons and pull down
the system outer foil.
3. Insert the system outer foil
until it clicks.
•
Always attach the system
outer foil in proper direction.
•
Always insert the system
outer foil to the foil frame
when attaching to the shaver.
Replacing the inner blades
1. Press the foil frame release
buttons and lift the outer foil
section upwards.
2. Remove the inner blades one
at a time.
•
Do not touch the edges
(metal parts) of the inner
blades to prevent injury to
your hand.
3. Insert the inner blades one at
a time until they click.
6
Removing the built-in rechargeable battery
Remove the built‑in rechargeable battery before disposing of the
shaver. Please make sure that the battery is disposed of at an
officially designated location if there is one. Do not dismantle or
replace the battery so that you can use the shaver again. This
could cause fire or an electric shock.
Please contact an authorized service center.
•
Disconnect the power cord from the shaver when removing the
battery.
•
Perform steps 1 to 4 and lift the battery, and then remove it.
2
3
For environmental protection and recycling of materials
This shaver contains a Lithium‑ion battery.
Please make sure that the battery is disposed of at an officially
assigned location, if there is one in your country.
2 3
Specifications
Power source
Motor voltage
Charging time
This product is intended for household use only.
See the name plate on the AC adaptor.
(Automatic voltage conversion)
3.6 V
Approx. 1 hour
Advertisement
