Advertisement
Available languages
Available languages
Reading lamps when charging
After charging is
While charging
completed
Blinks red once
Glows red.
every second.
•
Recommended ambient temperature for charging is 5‑35 °C. The
battery may degrade the performance or may not charge under
extreme low or high temperatures. The charge status lamp (
blink twice every second when there is a problem with charging.
Shave
Using the shaver
1
1
Rotate the lock ring to
unlock the power switch
and press the power
Page 3
switch.
•
We recommend using the shaver in an ambient temperature
range of 5 ‑ 35 °C. If used outside this range, the appliance may
stop operating.
10 minutes after
charging is
completed
Blinks red once
every 2 seconds.
) will
90˚
2
2
Hold the shaver
as illustrated
above and shave.
Start out shaving by applying gentle pressure to your face.
Stretch your skin with your free hand and move the shaver back
and forth in the direction of your beard. You may gently increase
the amount of pressure as your skin becomes accustomed to
this shaver. Applying excessive pressure does not provide a
closer shave.
Caution
•
If you press the power switch for more than 2 seconds, the
sonic vibration cleaning mode is activated.
You cannot shave in this mode.
•
Do not place your fingers on the power switch while using the
shaver. This may cause the shaver to turn off or enter the sonic
vibration cleaning mode.
Using the trimmer
Slide the trimmer handle up. Place at
a right angle to your skin and move
downwards to trim your sideburns.
Reading lamps when using
When the battery capacity is low
The battery capacity lamp (
•
You can shave 1 to 2 times after the battery
capacity lamp (
depending on usage.)
•
A full charge will supply enough power for approx. 1 shaves of
3 minutes each. (This will differ depending on usage.)
Page 5
) blinks.
) blinks. (This will differ
Advertisement
