Cleaning The Shaver - Panasonic ES-ST21 Operating Instructions Manual

Clean
Cleaning the shaver
1. Disconnect the power cord
from the shaver.
2. Apply some hand soap and
some water to the outer foil.
3. Rotate the lock ring to unlock
the power switch.
. Press the power switch for
more than 2 seconds to
activate the sonic vibration
cleaning mode.
•
The battery capacity lamp
( ) and the charge status
lamp ( ) blink alternately.
•
After about 20 seconds, it
will be automatically turned
off, or you can turn it off by
pressing the power switch.
5. Remove the outer foil section
and press the power switch for
more than 2 seconds to
activate the sonic vibration
cleaning mode and clean it
with running water.
6. Wipe off any drops of water
with a dry cloth.
7. Dry the outer foil section and
the shaver completely.
8. Attach the outer foil section to
the shaver.
9. Lubricate the shaver.
Lubrication
To maintain shaving comfort for a long time, it is recommended
that the oil provided with the shaver is used.
1. Switch off the shaver.
2. Apply one drop of oil to each of the outer foils.
3. Raise the trimmer and apply a drop of oil.
. Switch the shaver on, and run it for approximately five seconds.
5. Switch off the shaver, and wipe off any excess oil from the outer
foils with a soft cloth.
Cleaning with the brush
1. Clean the inner blades using
the short brush by moving it in
direction (A).
Clean the system outer foil,
the shaver body and the
trimmer using the long brush.
•
Do not move the short brush
in direction (B) as it will
damage the inner blades and
affect their sharpness.
•
Do not use the short brush to
clean the outer foils.
Replacing the system outer foil and the inner blades
system outer foil once every year
inner blades once every two years
(A) (B)
5