Operational Problems; The Ready Light Does Not Turn On; The Printer Does Not Print (Ready Light Off); The Ready Light Is On But Nothing Prints - Epson AcuLaser C4100 Reference Manual

Operational Problems

The Ready light does not turn on

Cause
The power cord may not be
properly plugged into the
electrical outlet.
The electrical outlet may be
controlled by an outside
switch or an automatic timer.

The printer does not print (Ready light off)

Cause
The printer is offline.

The Ready light is on but nothing prints

Cause
Your computer may not be
properly connected to the
printer.
What to do
Turn off the printer and check the
power cord connections between the
printer and the electrical outlet. Then
turn the printer back on.
Make sure that the switch is turned on
or plug another electrical device into the
outlet to check whether the outlet is
operating properly.
What to do
Press the N Start/Stop button once to
switch the printer to ready status.
What to do
Perform the procedure described in
"Connecting the Printer to a Computer"
in the Setup Sheet.
Troubleshooting
8
8
8
8
8
8
8
8
8
8
8
8
269