To confirm that the option is installed correctly, print a status
sheet. See "Printing a Status Sheet" on page 267.
Removing an interface card
Follow these steps to remove an interface card:
Caution:
c
Before you remove an interface card, be sure to discharge any
static electricity by touching a grounded piece of metal.
Otherwise, you may damage static-sensitive components.
1. Turn the printer off and unplug the power cord.
2. Remove the two screws securing the interface card to the back
of the printer.
w
3. Gently but firmly pull the interface card out of the socket.
Warning:
Removing screws that are not described in the following
instructions will expose high voltage areas.
Installing Options
6
6
6
6
6
6
6
6
6
6
6
6
219