Table of Contents
Advertisement
1. Re-access the printer driver as described in step 2 in "Creating
an overlay" on page 73.
2. Make the printer settings and exit the printer driver.
3. Send the same data that you made by application to the
printer like step 12 in "Creating an overlay" on page 73.
This setting is available only for Form Name data.
Using HDD form overlay
This function enables faster printing with form overlay data.
Windows users can use the form data registered in the optional
Hard Disk Drive installed in the printer though only an
administrator can register or delete the form data in the Hard Disk
Drive. You can access this function from the Form Selection dialog
box in the printer driver.
Note:
This function is not available when the Color setting is set to Black
in the printer driver's Basic Settings menu.
This function is not available if the optional Hard Disk Drive is not
installed.
Use this function by inputting the registered form name after
printing the Print List.
When the document's resolution, paper size or paper orientation
settings are different from the form overlay data that you use, you
cannot print the document with the form overlay data.
This function is available in the ESC/Page Color mode.
For Windows
3
3
3
3
3
3
3
3
3
3
3
3
79
Advertisement
Table of Contents
