Roth Softline – Controller 8 ch Master Manual page 5

If required up to 4 actuators can be connected to the same output/zone (32 actuators in total on the controller) Meaning: An output with 2, 3 or 4
terminals can all be connected with up to 4 actuators.
Step 2. Switch on the power supply and set your language Steg 2. Slå på strömförsörjningen och ställ in ditt språk
Steg 2. Slå på strömförsörjningen och ställ in ditt språk
Press MENU button and use the button ▼ to select "Language selection". Use the button ▼ to select your language and confirm with MENU button.
Steg 3. Kontrollera om enheterna fungerar korrekt
Step 3. Check if the devices work properly Step 4. Set current time and date
Steg 3. Kontrollera om enheterna fungerar korrekt
Once all the devices has been connected, switch on the power supply. You can choose to use the "Manual mode" function to check if each device
works properly, but it is not necessary to do this.
Steg 4. Ange aktuell tid och aktuellt datum
Steg 4. Ange aktuell tid och aktuellt datum
Press MENU button and use the button ▼ to select "Manual mode". Select "Valve 1" with MENU button – and carry on to all other valve's,
potential-free contact and pump. When all are activated all connected valves should open (takes around 5 min.), pump should be running (delay
2 min.) and the heatsource should be activated (delay 2 min.).
Menu
Menu
Language
version
Language
version
Menu
Menu
Manual
mode
Manual
mode
Potential-
Valves 1-8 free
Potential-
contact
Valves 1-8 free
contact
Menu
Menu
Time
settings
Time
settings
Clock
Automatic
settings
Clock
Automatic
settings
Pump
Pump
Date
settings
Date
settings
User Manual - 5/32