Epson AcuLaser C8500 Quick Reference Manual page 20

Messages Description
This message indicates an internal
/ error in the printer. Reset the printer.
If this error persists, consult your
dealer.
You have installed a
photoconductor unit that has not
been designed for this printer. Turn
off the printer, remove the incorrect
photoconductor unit and install
one designed for this printer
(S051073).
: The letters C, M, Y, or K appear
in place of
stand for Cyan, Magenta, Yellow,
and Black respectively.
The indicated toner cartridge(s) is
not installed in the printer. Install the
appropriate toner cartridge.
: The letters C, M, Y, or K appear
in place of
stand for Cyan, Magenta, Yellow,
and Black respectively.
The amount of remaining toner in
the indicated toner cartridge(s) is
very small. You can continue to
print until the
message appears, but early
replacement is recommended to
maintain high print quality.
Copyright © 2000 by SEIKO EPSON CORPORATION, Nagano, Japan
. C, M, Y, and K
. C, M, Y, and K
error
Messages Description
: The letters C, M, Y, or K appear
in place of
stand for Cyan, Magenta, Yellow,
and Black respectively.
No toner is left in the indicated
toner cartridge(s). Replace it with a
new toner cartridge.
. C, M, Y, and K
Printed in Japan 00. XX-XX
20 20 20 20