Epson AcuLaser C8500 Quick Reference Manual page 10

2. Pull the lever up to release the paper path.
w
Warning:
Do not touch the fuser, which is marked
CAUTION! HIGH TEMPERATURE, or the
surrounding areas. If the printer has been in
use, the fuser and the surrounding areas may be
very hot.
3. Turn the knob in the fuser unit to eject the jammed
paper.
4. Gently remove the jammed paper with both hands.
Be careful not to tear the jammed paper.
Note:
Be sure to remove the jammed paper by pulling it
upward.
If paper is torn, be sure to remove all torn pieces.
5. Push the fuser unit back into the printer firmly.
When the paper jam is cleared completely and the fuser
unit (unit B) is pushed back into the printer, the jammed
page's print data is automatically reprinted.
Clearing the paper path unit (Jam C)
When there is paper jammed at the paper path unit, the
LCD panel displays the
Follow these steps to clear paper jams in the paper path
unit:
1. Pull the paper path unit out until it stops.
2. Lift the cover inside the paper path unit by its
handle.
error message.
10 10 10 10