Table of Contents
Advertisement
6. Press [F4] to save the configuration and reboot the system.
7. Press [DEL] to enter BIOS.
8. Switch to Advanced > Intel® Virtual RAID on CPU > All Intel VMD Controllers >
Create RAID Volume.
9. Set Name.
10. Set RAID Level.
11. If cross-controller RAID is required, select Enable RAID spanned over VMD Controller
as shown in Figure F-4.
Figure D-3. Created Volume without
enabling RAID spanned over VMD
controller
12. Select specific disks for RAID with an [X].
•
RAID0: Select at least two [2 - 24] disks
•
RAID1: Select only two disks
•
RAID5: Select at least three [3 - 24] disks
•
RAID10: Select only four disks
13. Select Strip Size (Default 64KB).
14. Select Create Volume.
15. If another RAID is needed, start again at step 6.
16. Press [F4] to save and reboot.
Appendix D: CPU-Based RAID for NVMe
Figure D-4. Created Volume with
enabling RAID spanned over VMD
controller
133
Advertisement
Table of Contents
