ABB ZS1 Instruction Manual page 19

Figure 3/18: Lock for the circuit-breaker and cable compartment
14.9 Padlock
13.9
13.13
Figure 3/20: Pole side of a withdrawable part with circuit-breaker of
the high current type VD4
13.9 Protective cap used during transport
(remove before putting into service)
13.13 Lifting lug
(remove before putting into service)
20
14.9
Figure 3/19: View of the circuit-breaker compartment with the
withdrawable part removed and the shutters open
4.1
5
12.1 Shutter
43.3 Duct covering of the internal control wiring (above)
Figure 3/21: Withdrawable assembly for the withdrawable part with
auxiliary switches
S8
S9
10.3
Contact pin
Isolating tulip
S 8
S 9 10.3
Test position indicator
Service position indicator
Control wiring plug connection for the withdrawable
assembly
5
43.3
4.1
12.1
ABB Power Distribution