Setting Total Time 1; Pairing - BBB DIGIBOARD BCP-51W Complete Manual

SECTION 2B : FIRST TIME SET-UP : SETTINGS

SETTING TOTAL TIME 1

1. I t is possible to set the TOTAL TIME data into your new bic ycle computer. To selec t the first
digit, press + or -
2. To selec t, press M. R epeat these steps to selec t the other digits.
1

PAIRING

1. D ur ing the pair ing procedure the computer makes a secured digital connec tion with the
sensors. Once a sensor is found the computer will show "SPD FOUND ", "C AD FOUND " and/
or "HR T FOUND ", depending on the t ype of sensors you are using.
D ur ing the pair ing process the hear t rate, cadence and speed symbol will flash in the dis-
play. When a sensor is found, the symbol will stop flashing. B efore you star t using your bic ycle
wait until the pair ing process is completely finished and the computer display shows the main
screen.
Once sensors are paired the connec tion is stored in the computer memor y. The pair ing process
does not have to be repeated before each r ide.
The pair ing procedure can be repeated manually by pressing the M and F button together for 3
seconds.
Star ting the pair ing procedure manually is needed when sensors cannot be found or when a later
bought sensor needs to be paired.
1
3 s 3 s
All manuals and user guides at all-guides.com
2
16