Safety Instructions - Siemens SIMATIC IPC277D/E 19" INOX PRO Service Manual

Safety instructions

Extended maintenance work may only be carried out by qualified and correspondingly
trained personnel
The Service Manual describes extended maintenance work, among other things. The
device is opened as part of the extended maintenance work with work to take place on the
wiring or on electronic components inside the device. Injuries or material damage may
result if the work is not carried out correctly.
The maintenance work described in the Service Manual may only be carried out by
qualified specialist personnel who have been trained correspondingly by Siemens.
IP66 degree of protection
The device has IP66 degree of protection when it is closed. If the seals are not inserted
correctly during maintenance work or if the device is not closed properly, IP66 degree of
protection is no longer guaranteed. Humidity may penetrate the device. The result may be
damage to the device and personal injury.
Make sure you follow the instructions in this document precisely when replacing the seals.
Make sure that the seals are inserted correctly and that the covers are fastened properly.
Storage and transport
NOTICE
Damage from condensation
If the device is subjected to extreme changes in temperature during transportation, for
example, in the case of cold weather, moisture can built up on and in the device. Moisture
can result in short-circuits in electrical circuits.
The device no longer works correctly.
In case of condensation, you need to store the device in a dry place and slowly warm it up
to room temperature. However, do not expose the device to direct heat radiation. Wait
12 hours before you switch on the device.
6
WARNING
WARNING
SIMATIC IPC277D/E 19" INOX PRO, SIMATIC IFP1900 INOX PRO
Service Manual, 11/2017, A5E35751762-AC
2