Epson WorkForce 610 Series Quick Manual page 20

5. Adjust any of the following settings:
Setting and options
Resolution
Standard (default), Fine,
Photo
Contrast
–4 to +4
Paper Size
Letter (default), Legal, A4
Auto Reduction
On (default), Off
Last Transmission Report
On Error (default), On Send,
Off
Setting Up a Speed Dial or Group Dial List
You can create a speed dial list of fax numbers so you can quickly select them for
faxing. You can also set up a group dial list to automatically send the same fax
message to multiple speed dial numbers. The product allows you to create up to
60 combined speed dial and group dial entries, add names to identify the
recipients, and print a list for easy reference (see page 22).
Creating a Speed Dial List
1. Press the
2. Press ,
l
3. Press or
l
4. Select
Speed Dial Setup
20
Faxing a Document or Photo
button.
Home
, , or to select
r u d
to select
Fax Setting
r
, then press
Description
Sets the scan resolution of outgoing faxes and
the print quality of received faxes.
Sets the contrast when sending and receiving
faxes.
Indicates the size of paper loaded in the product.
Indicates whether large incoming faxes are
reduced to fit on the selected Paper Size (On), or
printed at their original size on multiple sheets
(Off).
Indicates when the product prints a report on the
last transmitted fax. Select Off to turn off report
printing, On Error to print reports only when an
error occurs, or On Send to print reports for
every fax you send.
, then press
Setup
, then press
.
OK
.
OK
.
OK