For Exhaust Air Operation - privileg SY-103B3-P1-C81-L22-600 User Manual

7. Fold the cover (7) down.

For exhaust air operation

(11)
(12)
1. Insert the two wings of the check valve
(3) using the pins (10) into the mounting
holes (11) of the exhaust port (12).
Gently bend the wings a little so as not to
break off the sensitive plastic noses.
2. Only in an underframe under a cabinet
element:
Mark the air outlet opening for the ex-
haust air hose (2) at the bottom of the
(7)
cabinet. Drill a hole inside the circle with a
wood drill.
Starting from there, saw out the circle us-
ing a jigsaw.
Smooth the edges with sandpaper.
(2)
(12)
(10)
3. Place the exhaust air hose (2) with the
153 mm diameter opening onto the ex-
(3)
haust air opening (12).
4. Secure the drain hose with the cable
tie (4).
Page GB-13
Assembly