Slican VPS-912G Instruction Manual
  1. Manuals
  2. Brands
  3. Slican Manuals
  4. IP Phone
  5. VPS-912G
  6. Instruction manual

Slican VPS-912G Instruction Manual

Hide thumbs Also See for VPS-912G:
Table of Contents

Advertisement

Quick Links

Download this manual
1
IP Phone VPS-912G
Instruction manual
Wydanie 1.1
2020-02-28
INSTRUKCJA OBSŁUGI VPS-912G

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VPS-912G and is the answer not in the manual?

Questions and answers

Related Manuals for Slican VPS-912G

Summary of Contents for Slican VPS-912G

  • Page 1 IP Phone VPS-912G Instruction manual Wydanie 1.1 2020-02-28 INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 2: Table Of Contents

    Spis treści 1. IP Phone VPS-912G ....................6 1.1. Notice Information, ................... 6 1.2. Packing List ...................... 7 2. Phone Installation ....................8 2.1. Attach the Foot stand ..................8 2.2. Connect the Headset ..................9 2.3 Connect the Network and Power ..............11 2.4.
  • Page 3 6.14. Call Mute ...................... 74 6.15. DND ......................74 6.16. Hot Line ......................75 6.17. Auto Redial ....................75 7. Function Keys Features and Settings ..............76 7.1. Line ........................ 76 7.2. Speed Dial ...................... 76 7.3. BLF ......................... 77 INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 4 7.24 SMS ......................95 7.24 Record ......................97 7.25 URL Record ....................98 7.26 Paging ......................98 7.27 Shared line ....................99 7.28 Public Hold ....................100 7.29 Private Hold ....................101 7.30 Hot Desking ....................102 INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 5 8.2 Pcap Feature ....................111 8.3 System Log ....................111 8.4 Auto Provisioning ..................112 8.5 Upgrade......................112 8.6. Configuration File ..................115 9. Troubleshooting ....................116 10. Annex ....................... 118 10.1. Hardware Specifications ................118 10.2. Technical Specifications ................119 INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 6: Ip Phone Vps-912G

    1. IP Phone VPS-912G Thank you for purchasing the VPS-912G. It is a fully functional mobile web enables voice communication over the network. This device works like a traditional phone: You can make and receive calls and use other functions specific to a regular phone.

  • Page 7: Packing List

    1.2. Packing List The package contains the following parts, please check if all the items are not missed: PHONE THE FOOTSTAND HANDSET INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 8: Phone Installation

    HANDSET CORD ETHERNET CABLE QUICK INSTALLATION REFERENCE 2. Phone Installation 2.1. Attach the Foot stand Attach the Foot stand INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 9: Connect The Headset

    Connect the Handset and optional Headset. 2.2. Connect the Headset In the VPS-912g series phones, the DB9 4P4C connector is used to connect headphones. INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 10 Using the wrong adapter may result in a missing or reduced signal quality from the microphone. When buying it, pay attention to the appropriate distribution of wires and polarity, or use an adapter with a multiswitch INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 11: Connect The Network And Power

    After your phone has been powered up, the system boots up and performs the following steps: - automatic phone initialization The phone finishes the initialization process by loading the saved configuration. The phone LCD screen will display "Booting": - and then show “Initializing “during the initialization process. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 12: Phone Status And Web Login

    For the phone to function properly, it must be logged in to the VoIP operator or to the local SIP server (PBX). We will receive the data needed to log in from the head office administrator or operator. INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 13 To configure the phone for registration, log in to the WEB interface and enter the VoIP server data in the profiles tab. Then go to the account tab, select the previously configured profile and complete the account data, i.e. login, password, name and mark the account as active. INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 14 After completing and saving the data, we can check the phone registration by displaying the status - by entering the home tab in the WEB interface. INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 15 Note: If there is a port of sip server, you need to press “1” on the keypad, then you will find the “:”. Additional Information: When the current input method is ABC/abc/2ab, Pressing “1”, you will find “, . ?:;”. Pressing “0”, you will find “ < >(){}[]”. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 16: Device Information

    Pressing “*”, you will find “*/"!@$”. Pressing “#”, you will find “#'%&*|”. If the status shows that the account is registered, the phone is ready for work. 3. Device information, 3.1. Device component overview, The layout of the keys on the phone INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 17 Mute -Mute the voice during the call. Headset -Indicate that the phone is or not in Headset mode. Message To indicator the New message, and press to read.. Transfer - Transferring a call to another subscriber INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 18 Icon Preview IKONA Description Network Line(Registered succeed) Line(Unregistered) Speakerphone mode Handset mode Headset mode Mute Forward Do Not Disturb SRTP Missed calls Dialed Calls Received calls Forward calls LED Instruction INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 19 Idle status for the monitored line Świeci ciągle na czerwono The monitored line is calling or during a call Blinked Red The monitored line is ringing All other unknown status Phone interface Overview 1. Information 1. Status 2. Network 3. Accounts INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 20 2. Advanced Settings 1. Language 2. Time & Date 3. Time & Date Format 4. DHCP Time 5. Ring Tone Basic Settings 6. Headset 7. Screensaver 8. User Mode 9. Gray Level 10. Font Size 11. Text Scroll INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 21: Phone Configuration

    Configuration from the browser level requires knowledge of the phone's IP address assigned by the DHCP server residing in the local network (the phone is set by default as a DHCP client). Press on the LCD to view the IP address: Menu -> Status ->Information INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 22 (admin by default). After logging in, a status window will be displayed with information about: model, software version, registered accounts, network settings. Depending on the phone's firmware version, the views of configuration options in the web browser interface may differ from those given in this manual. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 23: Administrator Password

    • hints and notes on settings, 4.2. Administrator Password The password is mainly used for login the Web interface or set the advanced settings through Phone interface. And the default password of the administrator is: admin. To change password via Phone interface INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 24: Network Setting

    Click SaveSet to save the configuration 4.3. Network Setting Slican IP Phone supports IPv4、IPv6、IPv4&IPv6.They have three mode of Network: DHCP, Static, and PPPoE. The default mode is DHCP, it will obtain IP address and other information automatically. If your phone cannot contact a DHCP server for any reason, you need to configure a static IP address manually.When switch DHCP,...
  • Page 25 To configure a static IP address via Phone interface: Press Menu→ Settings→ Advanced Setting (password: admin) → Network→ WAN Port → IPv4 → Static mode. Enter the parameters: IP, Netmask, Gateway, Pri.DNS(primary DNS), Sec.DNS (secondary DNS) in the corresponding fields. INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 26 Enter the User ID and password Click Save and restart the phone. To configure Network via Web interface: Click Network→ Basic→ IPv4 setting Select the desired Type: DHCP, Static or PPPoE Filled the necessary information Click the SaveSet and restart the phone INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 27 Press to change the IP Port Mode Press or Save soft key to save the configuration To configure IPv6 via Web interface: Click Network→ Basic→ Internet Port Select IPv6 for Internet Port Click SaveSet for the setting. INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 28 (secondary DNS) in the corresponding fields Click Save and restart the phone To configure Network via Web interface: Click Network→ Basic→ IPv6 setting Select the desired Type: DHCP, Static Fill required fields Click the SaveSet and restart the phone INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 29 Click Network→ Basic→ Internet Port Select IPv4&IPv6 for Internet Port Click SaveSet for the setting Note: Wrong network parameters may result in inaccessibility of your phone and may also have an impact on your network performance. For more information about INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 30: Pc Port Configuration

    Click the OK button, then the phone will reboot To configure Bridge or Router via Web interface: Click Network→ PC Port Select As Bridge or As Router if router is selected fill the IP address and other necessary information Click SaveSet for the setting INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 31: Language

    Press Menu → Settings → Basic Setting → Language. Press or Save soft key to save the configuration. To change the language via Web interface Setting → Preference →Web Language & LCD Language Select the necessary one. Press to save the configuration. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 32: Time And Date

    Press or Save soft key to save the configuration To configure the Time & Date Format via Phone interface Press Menu → Settings → Basic setting → Time & Date Format INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 33 To configure the NTP Server by Web interface Select the tab: Settings → Date and time We make changes in individual fields: • Time Zone • NTP Server • Daylight Saving Time • Time Format • DHCP Time • SIP Date Override Time INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 34: Screen Saver

    2/5/10/30 minute, then press the Save button Enter the Screensaver Type to choose one of the type: Logo only or Time & Logo Press or Save soft key to save the configuration To disable screen saver via Phone interface INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 35: Ring Tone

    Profiles → Advanced tab. To adjust the Ring Tone Type via Phone interface Press Menu → Settings → Basic Setting → Ring Tone Press to select the aimed one Press or Save soft key to save the configuration INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 36 Press Save soft key to save the contact To configure Distinctive Ring Tone via Web interface Directory → Directory → Contact Choose the Ring Tone you want to use Click Edit → Save to save the configuration INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 37: Volume

    4.9. Volume To adjust the Ring tone volume via Phone interface Option 1: Press on the idle page INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 38 Press during a call in handset mode To adjust the headset volume via Phone interface Press during a call in headset mode To adjust the speaker Volume via Phone interface Press during a call in speaker mode INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 39 3, 4, or 5 [147] any digit 1, 4, or 7 <2=011> replace digit 2 with 011 when dialing To configure dial plan via Web interface: Click Account →Basic →Dial Plan Fill the value in dial plan field. INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 40 Some countries have a different emergency number for each of the different emergency services. You can specify the emergency telephone numbers on the IP phone for contacting the emergency services in an emergency situation. INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 41 Whether to show missed call notification on LCD To configure Show Missed Calls via Web interface: • Click the Setting → Preference • Select Yes or No for Show Missed Calls. • Click for the setting. Auto Logout Time Set the Web login timeout INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 42 • Click the Setting → Preference • Set Direct Mode or Select Mode for Redial Mode. • Click for the setting. Keypad Lock To enable Keypad Lock via Phone interface • Press Menu--Settings--Advanced Setting--Phone Setting—Lock INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 43 Suppress DTMF Display In order to ensure safety in Call process, you can choose whether to hide DTMF • Click the Setting → Preference • Select On or Off for Suppress DTMF Display. • Click for the setting. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 44: Contact Setting

    No. so you will not forget their number. Or put some anonymous phone No. in the blacklist to prevent from being disturbed. The local Directory can add up to 1000 contacts. To add contacts manually via Phone interface Press Menu → DIR→ Contacts... Press Add soft key INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 45 Edit the necessary information as Name, Phone number… Press or Save soft key to add the contacts successfully To add contacts via Web interface Click Directory→ Directory Enter the name, number and some other information Press Add and then Save press button INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 46 Press Add soft key Enter the Name and select the Ring Tone Press or Save soft key to add the Group successfully Enter the added Group, then press Add soft key Enter the necessary information as Name, Phone number… INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 47 Click Choose file to select a contact list file (file format must be .csv) from your local system. Click Import Csv to import the contact list. To export a CSV file of contact list via Web interface: Click on Directory → Directory Click Export Csv to export the contact list. INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 48 Login the Web interface and click Directory→ Remote Phone Book Fill the path of the remote file in the Phone Book URL field. For example, http://192.168.0.106/Phonebook/Remote_Phonebook/remotephonebook.xml Fill the Name and then click SaveSet to save the configuration INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 49 Port(the port of the LDAP Serve) Base, User Name, Password Max.Hits(1-32000): the maximum number of the search results to be returned by the LDAP server LDAP Display Name: the display name of the contact record displayed on the LCD screen. INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 50 Following is the example screenshot for the configuration. Configure LDAP Key To configure LDAP Key via Web interface: Click Function Keys→ Line Key→ choose Line Key 2(for example) Select LDAP in the Type field. Click SaveSet to save the configuration INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 51 Click the Search soft key, you can enter the desired part of name or part of number. With the search content to match the contact will be automatically displayed on the LCD within 5 seconds To search contact in Local contacts: INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 52: Call History

    This phone maintains call history lists of Dialed Calls, Received Calls, Missed Calls and Forwarded Calls. The call history list supports up to100 entries in all on Phone interface and more than 1500 items. You can check the call history, dial a call, add a INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 53 Dialed Calls and Forwarded Calls Press UP or DOWN key to select the desired entry Press the Delete soft key To delete all entries from the call history list via Phone interface: Press the History soft key INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 54 Select the desired history item, and click Tel Number. Then the call is dialed on phone. To Dial a call from Call History via Phone interface: Press History soft key or press Menu → History → Local History INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 55: Voip Accounts Configuration

    VoIP server address, then the accounts, where we enter the remaining data. Profile configuration via Web interface Login Web interface and Click Profile→ Basic Fill the Primary SIP Server and other profile information Select the SIP Transport Click SaveSet to save the configuration INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 56 Note: If there is a port of sip server, you need to press “1” on the keypad, then you will find the “:”. Additional Information: When the current input method is ABC/abc/2ab, Pressing “1”, you will find “, . ?:;”. INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 57 Fill the SIP User ID, Authenticate ID, Authenticate Password and other account information. Click SaveSet to save the configuration. Note: 1. All fields with * must be filled. If changed, it requires a phone restart. 2. Account Status says the account registered successfully or not. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 58: Advanced Configuration Of Voip Profiles

    • Force Invite: The Session Timer can be refreshed using the INVITE method or the UPDATE method. • Refuse-Return-Code: defines the call rejection code in the SIP signaling process. • Caller Display Source: caller presentation transmission method. INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 59 INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 60: Codecs

    To place a call by Handset Pick up the handset, or press a line key and dial the necessary number.. Press or press the Send soft key, then the call is sending. To place a call by Headset: INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 61 Send soft key, then the call is sending. Note: The key is set to be a send key. For more information, refer to the Key as Send on page During the call, you can also change among Headset, Handset or Free-speaker mode.. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 62: End A Call

    LCD is on the idle interface 6.4. Receive a Call There are three ways to receive a call when the phone is ringing: To receive a call by handset Pick up the handset and now the conversation is built. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 63: Incoming Call Show Mode

    6.6. Auto Answer Enable auto answer feature, you will answer all incoming call automatically. To enable Auto Answer via Web interface To Click Profile → Advanced To choose Yes for the Auto Answer. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 64: Call Hold

    To hold a call during the speaker mode: Press Hold soft key to hold the current call. Press Resume soft key to resume the call on hold. 6.8. Call Transfer This phone supports blind, attended and Semi-Attended Transfer: Blind Transfer: INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 65 Set a Programmable Key or line key is set as BLF. For how to set BLF, please refer to BLF. Press the Transfer soft key during the conversation, the call is on hold now. Press BLF key then realize blind, attended and Semi-Attended Transfer. (Webpage--Setting--Features--Transfer Settings). INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 66 A press the End Call soft key or on-hook to exit the meeting in the process of talking. Then B and C will continue to talk. Transfer to New Call via Web interface: Click Setting → Features INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 67: Call Conference

    This IP Phone supports up to 5-way conference. 5-way conference: Assuming that call party A and B are in conversation. A wants to bring C, D and E in a conference A press the Conference soft key, the call is placed on hold. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 68: Call Forward

    4. To realize the 5 way conference, the line should be all available. 6.8. Call Forward This phone supports static forward (always forward, busy forward and no answer forward) and dynamic forward. To configure static forward To configure always forward: INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 69 When the Forward feature is enabled, the Forward Icon will display on Status Bar of the LCD. To configure Forward via Web interface: Setting → Features Click On for the Always/Busy/No Answer Forward Fill the Target Number Fill the After Ring Time INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 70 To configure dynamic forward Forward an incoming call during the ringing: When the phone is ringing, press FWD soft key. Enter the forward number or select the desired number from Directory soft key INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 71: Call Return

    When this option is set, if the phone you call is busy and does not set call waiting or voice mail, your LCD screen will prompt for call-back, as shown in figure If you press the callback, the phone will dial the Callback phone number. To configure the Call Back via Web interface: INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 72: Call Waiting Tone

    Click Setting → Features Select Call Waiting: On and Call Waiting Tone: On To Change the Call Waiting Tone time via Web interface: Click Setting → Tones Change the Tone Time as you want (for example 3s). INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 73: Hide Caller Id

    To configure rejecting anonymous call: Press Menu →Features →Anonymous Call →Account ID 1 Press or press Info/Switch soft key to select the enable choice in Rejection filed. Enter the Reject On Code (optional), Reject Off Code (optional). INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 74: Call Mute

    Press the DND soft key when the phone is idle, and then DND icon shown on the LCD. To disable DND feature via Phone interface: Press the DND soft key again, and then there is no DND icon on the LCD.. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 75: Hot Line

    To configure Auto Redial via Web interface: Click Setting →Features → Auto Redial Select On or Off for Auto Redial. Fill the number 1~300 seconds for the Auto Redial Interval. Fill the number 1~300 times for the Auto Redial Times. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 76: Function Keys Features And Settings

    3. Select the Account. 4. Click the button to save the configuration 7.2. Speed Dial With this feature, you can dial one number by pressing the configured speed dial key. To configure Speed Dial feature via Phone interface: INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 77: Blf

    • When the extension you are monitoring is idle, the light is steady green. • When the monitored extension is ringing, the light is blinking red, press the BLF key to pick the phone up directly. INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 78 • Click Function keys → Line Key. • Select the desired Line Key and select BLF in the Type. • Enter the monitored phone number in the Value field. • Select the Account • Fill the Extension. • Click to save the configuration. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 79: Blf List

    • To configure BLF List Keys − Click→ Function Keys→ Line Key − Select the BLF List in the Type Field. − Select Account − Click SaveSet to save the configuration and then restart the Phone. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 80: Voice Message

    • Select the Account. • Click to save the configuration. To configure a Voice mail key by Phone interface: • Press Menu →Features →Function Keys →Line Keys as Function Keys→ Line Key2(for example). • Select the targeted Line Key. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 81: Direct Pickup

    When all new voice mails are retrieved, the power indicator LED will go out. 7.6. Direct Pickup With this feature, you can pick up the set line when it ringing. To configure Direct Pickup feature via Phone interface: INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 82: Group Pickup

    With this feature, you can pick up the specified group that you want incoming calls. To configure the Group Pickup via Phone interface: • Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example) INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 83: Call Park

    With this feature, you can put a call on hold and continue the conversation from another phone. To configure the Call Park via Phone interface: • Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example) INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 84: Intercom

    • Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example) • Press key to select the Intercom in the Type field. • Enter the intercom codes followed by desired number in the Value field. INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 85 • Click Profile • Select the desired profile from the pull-down list of Profile in the Profile field. • Click Advanced • Enable the “Allow Auto Answer By Call-Info” • Click the button to save the configuration. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 86: Intercom Barge

    To configure the DTMF via Phone interface: • Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example) • Press key to select the DTMF in the Type field. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 87: Prefix

    Prefix in the Type field. • Enter the value with number that you want to set as prefix • Press or Save soft key to save the configuration To configure the Prefix via Web interface: INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 88: Local Group

    Save soft key to save the configuration To configure the Local Group via Web interface: • Click Function keys → Line Key. • Select the desired Key and select Local Group in the Type. • Click the button to save the configuration INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 89: Xml Group

    Save soft key to save the configuration To configure the XML Group via Web interface: • Click Function keys → Line Key. • Select the desired Key and select XML Group in the Type. • Click the button to save the configuration INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 90: Ldap

    Save soft key to save the configuration To configure the LDAP via Web interface: • Click Function keys → Line Key. • Select the desired Key and select LDAP in the Type. • Click the button to save the configuration. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 91: Broadsoft Group

    7.17. Conference The Slican IP Phone supports up to 5-way conference. You are allowed to configure the programmable key to be used as a conference key. This key works same as To configure the Conference via Phone interface: •...

  • Page 92: Forward

    • Enter the Value with the number you want to forward to. • Click the button to save the configuration. 7.19 Transfer You are able to configure the key as a transfer key to perform the Blind/Attended/ INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 93: Hold

    • Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example) • Press key to select the Hold in the Type field. • Press or Save soft key to save the configuration To configure Hold via Web interface • Click Function keys →Line Key. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 94: Group Listening

    Press it again to deactivate DND mode. To configure the DND via Phone interface • Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example) • Press key to select the DND in the Type field. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 95: Redial

    • Enter the Label displayed on LCD. • Click the button to save the configuration. 7.24 SMS Send SMS To send SMS via web Interface • Click Setting→ SMS • Select the Account(from which account the SMS sent) INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 96 • Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example) • Press key to select the SMS in the Type field. • Press or Save soft key to save the configuration To configure SMS via Web interface INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 97: Record

    • Click Function keys → Line Key. • Select the desired Line Key and select Record in the Type. • Click the button to save the configuration. Note: Please contact the system administrator whether support this feature or not. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 98: Url Record

    • Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example) • Press or press Switch soft key to select the Paging in the Type field. • Enter the paging code followed the number. • Press key to select the Account ID. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 99: Shared Line

    7.27 Shared line Slican IP Phone supports “Share Call Appearance” by Broadsoft and XCast standard. This feature allows members of the SCA group to share SIP lines and provides status monitoring (idle, active, progressing, hold) of the share line. When there is an...

  • Page 100: Public Hold

    Note: This feature is not available on all servers. For more information, contact your system administrator 7.28 Public Hold The key can be configured as a public hold key. During a conversation, all members belonging to that particular SLA group can use this key to hold or resume a call. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 101: Private Hold

    To configure the Private hold via Phone interface • Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example) • Press key to select the Private Hold in the Type field. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 102: Hot Desking

    To configure the hot desking via Phone interface • Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example) • Press or press key to select the Hot Desking in the Type field. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 103: Acd

    The ACD feature on the Slican IP Phone allows the ACD system to distribute calls from large volumes of incoming calls to the registered IP phone users.

  • Page 104: Zero Touch

    • Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example) • Press or press key to select the Zero Touch in the Type field • Press or Save soft key to save the configuration INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 105: Multicast Paging

    10 multicast listening addresses. Sending RTP Stream To configure a multicast paging key via Phone interface • Press Menu →Features →Line Key →Line Key2（e.g.） • Press or Switch key to select the Multicast Paging in the Type field. INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 106 Barge, the voice call in progress will take precedence over all incoming multicast paging calls. Valid values in the Paging Barge field: • 1 to 10: Define the priority of the active call, 1 with the highest priority, 10 with the lowest. INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 107 • Enter the multicast IP address(es) and port number (e.g., 224.5.6.20:2000) which the phone listens to for incoming RTP multicast in the Listening Address field. • Enter the label in the Label field. • Click button to save the configuration. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 108: Softkey Layout

    • Select the feature form the disable key to enable key field by moves the Disable key to Enable field. moves the Enable key, and it will back to Disable field. • Click to change to position or each feature. • Click to save the configuration. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 109: Programmable Key

    To configure Programmable Key via Web interface: • Click Function Keys→ Programmable Key • Select the desired Key to set. • Click to save the setting. • By clicking , all setting of the keys will be back to default. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 110: Management

    • Press Menu → Settings → Advanced Setting( default password: admin) → Phone Setting → Factory Reset • Press OK soft key in the warning page. To set Factory Reset via Web interface • Click Management → Upgrade • Click and then confirm the setting. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 111: Pcap Feature

    • Click Management→ Tools • Click Start and then operation the phone • When finish the operation, click Stop and then click Export. • Then you’ll get the Pacp captures. 8.3 System Log To download system log via Web interface: INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 112: Auto Provisioning

    To start the automatic configuration mode, enable the option: Management → Auto Provision → Active PNP in the web interface. 8.5 Upgrade To upgrade via HTTP, the “Management”->“auto provision” ->” Firmware Upgrade”-> “Upgrade Mode” field needs to be set to HTTP, respectively. “Firmware Server Path” INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 113 • Enter the Firmware Server Path and Config Server Path (192.168.0.254 is HTTP server). • Enter the HTTP server’s username and password (optional). • Click the button to save the configuration. • Restart the VPS912G, IP Phone will restart and auto-get firmware files from HTTP server. INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 114 Note: Slican recommends end-user use the Slican HTTP server. For large companies, we recommend to maintain their own TFTP/HTTP/FTP/HTTPS server for upgrade and provisioning procedures. Once a “Firmware Server Path” is set, user needs to update the settings and restart the IP Phone.

  • Page 115: Configuration File

    , then you can get a file: cfg.bin or cfg.xml To Restore a configuration file: • Click Management → Configuration →Configure File • Select the xxx.bin or xxx.xml file, and then Click the or , then IP Phone will reboot. INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 116: Troubleshooting

    Ethernet cable is not loose. • Ensure that the switch or hub in your network is functioning well. • If the problem still persists, Contact your system administrator for more information. Why can’t I get a dial tone? To resolve: INSTRUKCJA OBSŁUGI VPS-912G...
  • Page 117 • Define the dial tone, ringing, busy tone… • For the tones, you can check with your system administrator. • For more Click Tone Notes. How to download XML Configuration? • Click Management→ Configuration→ How to Import Trusted CA certificate? INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 118: Annex

    • Click Management→ Trusted CA How to Import Server CA certificate? Click Management→ Server CA 10. Annex 10.1. Hardware Specifications COMPONENT DESCRIPTION INSTRUKCJA OBSŁUGI VPS-912G...

  • Page 119: Technical Specifications

    VLAN QoS(802.1q), ToS, DiffServ Declaration of conformity available on the website SLICAN sp. Z.o.o. declares that the VPS 912G device complies with Directive 2014/30 / EU. The full text of the EU Declaration of Conformity is available at the Internet address: www.slican.pl/deklaracje/...
  • Page 120 For information on the place and method of environmentally safe recycling of this product, household users should contact the retail outlet where they purchased the product or the local authority. SLICAN Sp. z o.o. www.slican.pl office@slican.pl support@slican.pl "The manufacturer reserves the right to make changes to the product without prior notice."...

Table of Contents