Join A Call In Progress (For Multiple Handset Models Only); Call Waiting; Chain Dialing - VTech CS6324 User Manual

Join a call in progress (for multiple
handset models only)
You can use three handsets at a time on an
outside call.
• When a handset is already on a call,
press TALK on another handset to
join the call.
• To exit the call, press OFF on the
handset or place it in the telephone
base or charger. The call continues until
all handsets hang up.

Call waiting

When you subscribe to call waiting service
from your telephone service provider, you
hear an alert tone if there is an incoming
call while you are already on a call.
• Press FLASH to put the current call on
hold and take the new call.
• Press FLASH at any time to switch back
and forth between calls.
If you also subscribe to caller ID service, it
will let you see the name and telephone
number of the caller during call waiting.
It may be necessary to change your
telephone service to use this feature.
Contact your telephone service provide if:
• You have both caller ID and call waiting,
but as separate service (you may need
to combine these service);
• You have only caller ID service, or only
call waiting service; or
• You do not subscribe to caller ID or call
waiting services.
There are fees for caller ID services. In
addition, services may not be available in
all areas.

Chain dialing

Use this feature to initiate a dialing
sequence from numbers stored in the
phonebook, caller ID log or redial while
you are on a call.
Chain dialing can be useful if you wish
to access other numbers (such as bank
account numbers or access codes) from
the phonebook, caller ID log or redial list.
To access a number in the phonebook
while on a call:
1. Press MENU/SELECT twice to enter the
phonebook.
2. Press q or p to scroll to the desired
entry.
3. Press SELECT to dial the displayed
number.
To access a number in the caller ID log
while on a call:
1. Press MENU and then press q or p to
select Caller ID log.
2. Press SELECT and then press q or p
to scroll to the desired entry.
3. Press SELECT to dial the displayed
number.
To access a number in the redial list
while on a call:
1. Press REDIAL.
2. Press q, p or REDIAL repeatedly to
browse to the desired entry.
3. Press SELECT to dial the displayed
number.
NOTE NOTES
NOTES
• You cannot edit a phonebook entry while
on a call. Refer to the Phonebook section for
more details.
• You cannot copy a caller ID log entry into
the phonebook while on a call. Refer to the
Caller ID log section for more details.
• You cannot erase a redial entry while on a
call. Refer to the Redial list section for more
details.
• Press CANCEL to exit redial, phonebook or
caller ID log when you are on a call.
9