Do you have a question about the CS6529 and is the answer not in the manual?
Questions and answers
Helen Kalinsky
March 1, 2025
V-Tech model CS6529-4
Helen Kalinsky
March 1, 2025
V-Tech model CS6529-4- speaker phone on 1 of the hand sets is not working? any fix for this. Was working and just stopped
1 comments:
Mr. Anderson
March 1, 2025
To fix a speakerphone issue on the VTech CS6529 handset, try the following steps:
1. Control Background Noise – Excessive noise can cause the speakerphone to fade in and out. Turn off nearby audio devices and avoid interrupting the other person while they are speaking.
2. Stay Close to the Base or Handset – Ensure you are within a reasonable distance from the base or handset when using the speakerphone.
3. Reset the Telephone System – Follow these steps to reset the system: - Disconnect the power from the telephone base. - Remove the handset batteries. - Wait a few minutes, then reconnect the power to the base and reinstall the batteries.
If the issue persists, test the unit at another location to check for a line problem. If it works elsewhere, contact your local telephone company.
Page 1
A limited set of features are described in abbreviated form. Please refer to the online Complete user’s manual for a full set of installation and operation instructions at www.vtechphones.com. Before using this VTech product, please read Important safety instructions on page of this user’s manual.
Parts checklist Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. Handset Charger and Telephone base Telephone charger adapter line cord ( for CS659/CS659-4/ CS659-5/CS659-6/ ( for CS659-/CS659-5/ CS659-7/CS659-9) CS659-6) ( for CS659-/CS659-5/...
Battery installation Install the battery as shown below. Plug the battery connector Place the battery with the label THIS SIDE UP facing up and securely into the socket. the wires inside the battery compartment. Slide the battery compartment cover Place the handset in the telephone towards the center of the handset until base or charger to charge.
Wall mounting (optional) To mount your telephone on a wall: Remove the telephone line cord Position the telephone base against from the telephone wall jack, and the the wall mount bracket with the telephone base power adapter from extended tabs marked B on top. Insert the extended tabs marked B the electrical outlet (if necessary).
Telephone base overview Message window /REPEAT • Shows the number of messages, and other • Press to repeat a message. information of the answering system or • Press twice to play the telephone base. previous message. X/DELETE IN USE light •...
Set date and time If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. You can also set the date and time manually. Press MENU when the handset is not in use. Scroll to Set date/time and then press SELECT.
Join a call in progress You can use up to two system handsets at a time on an outside call (for models with two or more handsets). • When a handset is on a call, press on another handset to join the call. Press OFF or place the handset in the telephone base or charger to exit the •...
To edit a directory entry: When the desired entry displays, press SELECT. Use the dialing keys to edit the number, then press SELECT. Use the dialing keys to edit the name, then press SELECT to confirm. To delete a directory entry: When the desired entry displays, press DELETE.
Answering system settings Default settings are indicated by asterisks (*). Settings menu Description Options Call screening Screening: On* Set whether you hear the callers while they are leaving messages to you. Screening: Off # of rings 3*; 2; Toll saver; Set the number of times the telephone rings 6;...
Add and register a handset The handsets provided with your telephone system are already registered. Each handset is assigned a number that show on the handset display. Additional handsets registered to the telephone system are assigned in the sequential order. This telephone system accommodates up to five handsets.
• If toll saver is selected, the number of rings changes to two when there are new messages waiting. • If the memory is full or if the answering system is off, the answering system answers after 0 rings. • In some cases, the answering system is affected by the ringing system used by your telephone service provider.
Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless telephones): Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers. Supported by the U.S.
VTech will return repaired or replaced Product under this limited warranty. Transportation, delivery or handling charges are prepaid. VTech assumes no risk for damage or loss of the Product in transit. If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity.
A member of THE VTECH GROUP OF COMPANIES. Distributed in the U.S.A. by VTech Communications, Inc., Beaverton, Oregon 97008. Distributed in Canada by VTech Technologies Canada Ltd., Richmond, B.C. V6W L5. VTech is the registered trademark of VTech Holdings Limited.
Need help?
Do you have a question about the CS6529 and is the answer not in the manual?
Questions and answers
V-Tech model CS6529-4
V-Tech model CS6529-4- speaker phone on 1 of the hand sets is not working? any fix for this. Was working and just stopped
To fix a speakerphone issue on the VTech CS6529 handset, try the following steps:
1. Control Background Noise – Excessive noise can cause the speakerphone to fade in and out. Turn off nearby audio devices and avoid interrupting the other person while they are speaking.
2. Stay Close to the Base or Handset – Ensure you are within a reasonable distance from the base or handset when using the speakerphone.
3. Reset the Telephone System – Follow these steps to reset the system:
- Disconnect the power from the telephone base.
- Remove the handset batteries.
- Wait a few minutes, then reconnect the power to the base and reinstall the batteries.
If the issue persists, test the unit at another location to check for a line problem. If it works elsewhere, contact your local telephone company.
This answer is automatically generated