VTech CS6324 User Manual page 12

Charge the battery
Place the handset in the telephone base or
the charger to charge.
Once you have installed the battery, the
handset LCD display indicates the battery
status (see the following table).
NOTES NOTE
NOTES
• For best performance, keep the handset in
the telephone base or charger when not in
use.
• The battery is fully charged after 16 hours of
continuous charging.
• If you place the handset in the telephone
base or the charger without plugging in the
battery, the screen displays No battery.
Battery
indicators
The screen The battery
is blank, or has no or
displays Put in very little
charger and charge. The
flashes. handset
cannot be
used.
The screen The battery
displays has enough
charge to be
Low battery
used for a
and flashes.
short time.
The screen The battery
displays is charged.
HANDSET X.
Battery
Action
status
Charge
without
interruption
(at least 30
minutes).
Charge
without
interruption
(about 30
minutes).
To keep
the battery
charged,
place it in the
telephone
base or
charger when
not in use.
When the battery is fully charged, you can
expect the following performance:
Operation
While in use (talking*)
While not in use (standby**)
* Operating times vary depending on your
actual use and the age of the battery.
** Handset is not charging nor in use.
5
Operating
time
Seven hours
Five days