Maintenance - Makita BTD040 Instruction Manual

Hide thumbs Also See for BTD040:
Table of Contents


Available languages
  • EN

Available languages

  • ENGLISH, page 1
The manner of holding the tool or the material of
driving position to be fastened will affect the torque.
Operating the tool at low speed will cause a reduc-
tion in the fastening torque.


Always be sure that the tool is switched off and the bat-
tery cartridge is removed before carrying out any work on
the tool.
Replacement of carbon brushes (Fig. 11 & 12)
Replace carbon brushes when they are worn down to the
limit mark. Both identical carbon brushes should be
replaced at the same time.
To maintain product safety and reliability, repairs, mainte-
nance or adjustment should be carried out by a Makita
Authorized Service Center.
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita service center.
• Bit-piece
• Protector (clear, red, blue)
• Various type of Makita genuine batteries and chargers
• Automatic refreshing adapter

Hide quick links:


Table of Contents

This manual is also suitable for:


Table of Contents