Cordless impact driver equipped with electric brake (21 pages)
Summary of Contents for Makita BTD040
Cordless Impact Driver Equipped with Electric Brake MODEL BTD040 MODEL BTD060 001249 I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
SPECIFICATIONS Model BTD040 BTD060 4 mm - 8 mm 4 mm - 8 mm Machine screw (5/32” - 5/16”) (5/32” - 5/16”) 5 mm - 10 mm 5 mm - 12 mm Capacities Standard bolt (3/16” - 3/8”) (3/16” - 1/2”)
3. Keep bystanders, children, and visitors shoes, hard hat, or hearing protection must away while operating a power tool. Dis- be used for appropriate conditions. tractions can cause you to lose control. Tool Use and Care Electrical Safety 12. Use clamps or other practical way to 4.
20. Use only accessories that are recom- tenance performed by unqualified personnel mended by the manufacturer for your may result in a risk of injury. model. Accessories that may be suitable for 22. When servicing a tool, use only identical one tool may create a risk of injury when replacement parts.
SYMBOLS USD302-1 The followings show the symbols used for tool. V ....... volts .../min....revolutions or reciprocation per minute ....direct current ....number of blow ....no load speed ˚ IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CARTRIDGE ENC005-1 Before using battery cartridge, read all instruc- Avoid storing battery cartridge in a con- tions and cautionary markings on (1) battery tainer with other metal objects such as...
80% - 100% not been used for a long time, or is needed refresh charging, 60% - 80% 40% - 60% the orange lamp begins to flicker. Use Makita refreshing 10% - 40% adapter to refresh the battery. 0% - 10%...
Electric brake This tool is equipped with an electric brake. If the tool consis- tently fails to quickly stop after switch trigger release, have tool serviced at a Makita service center. Reversing switch action 001257 This tool has a reversing switch to change the direction of rotation.
ASSEMBLY CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Installing or removing driver bit or socket bit 001266 Use only the driver bit or socket bit shown in the figure. Do 12 mm 9 mm not use any other driver bit or socket bit.
Hold the tool firmly and place the point of the driver bit in the 002844 screw head. Apply forward pressure to the tool to the extent BTD040 Standard bolt that the bit will not slip off the screw and turn the tool on to start operation.
Makita Authorized or Factory Service Centers, always using Makita replacement parts. EN0001-1 Recycling the Battery The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. To recycle the battery: 1. Remove the battery from the tool.
CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
Your answers to the following questions are appreciated. 1. This product was purchased from? 3. How did you first learn of Makita Power Tools? Hardware/lumber Store Industrial Supply Magazine/Newspaper Catalog Tool Distributor Other ( From dealer Other ( Store display 2.
When you need service... DATE • Explain the problem in a letter PURCHASED: • Enclose the letter with the tool DEALER’S NAME • Package carefully and send prepaid & ADDRESS: to the nearest Makita factory or authorized service centre MODEL NO.: SERIAL NO.:...
WARRANTY. “The Makita Warranty is the only and the entire written warranty given by Makita for the Makita tools. No dealer or his agent or employee is authorized to extend or enlarge upon this warranty by any verbal or written statement or advertisement.”...