1. Manuals
  2. Brands
  3. Makita Manuals
  4. Impact Driver
  5. BTD042
  6. Instruction manual

Makita BTD042 Instruction Manual

Cordless impact driver
Hide thumbs Also See for BTD042:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Technical Information, Instruction Manual
INSTRUCTION MANUAL
Cordless Impact Driver
BTD042
BTD062
001249
IMPORTANT: Read Before Using.
1

Advertisement

Table of Contents
loading

Related Manuals for Makita BTD042

Summary of Contents for Makita BTD042

  • Page 1 INSTRUCTION MANUAL Cordless Impact Driver BTD042 BTD062 001249 IMPORTANT: Read Before Using.

  • Page 2: Specifications

    ENGLISH (Original instructions) SPECIFICATIONS Model BTD042 BTD062 Machine screw 4 mm - 8 mm 4 mm - 8 mm Capacities Standard bolt 5 mm - 10 mm 5 mm - 12 mm High tensile bolt 5 mm - 8 mm...

  • Page 3: General Power Tool Safety Warnings

    Do not use any Makita Corporation responsible adapter plugs with earthed (grounded) power manufacturer declare that the following Makita tools. Unmodified plugs and matching outlets will machine(s): reduce risk of electric shock. Designation of Machine:...
  • Page 4 away from moving parts. Loose clothes, terminals together may cause burns or a fire. jewellery or long hair can be caught in moving 27. Under abusive conditions, liquid may be parts. ejected from the battery; avoid contact. If 16. If devices are provided for the connection of contact accidentally occurs, flush with water.

  • Page 5: Functional Description

    result in a risk of overheating, possible burns FUNCTIONAL DESCRIPTION and even an explosion. If electrolyte gets into your eyes, rinse them out with clear water and seek medical CAUTION: attention right away. It may result in loss of Always be sure that the tool is switched off and the •...
  • Page 6 Changing the direction of needed refresh charging, the orange lamp begins to rotation before the tool stops may damage the tool. flicker. Use Makita refreshing adapter to refresh the When not operating the tool, always set the •...
  • Page 7 Example: 1. Tool housing presetting number is 12. • 2. Screwdriver Green color lamp flashes once. Red color lamp flashes two times. The lamp goes out. Relation between presetting number and action Presetting 001260 Clockwise rotation Counterclockwise rotation number Release the switch trigger. (The indicating lamp Auto-stop setting does not work.

  • Page 8: Operation

    B=9mm (Note) Bit-piece is necessary for installing the bit. Standard bolt BTD042 011405 To install the bit, pull the sleeve in the direction of the arrow and insert the bit into the sleeve as far as it will go. Then release the sleeve to secure the bit.

  • Page 9: Maintenance

    When the battery cartridge is discharged almost completely, voltage will drop and the fastening Standard bolt BTD062 torque will be reduced. Driver bit or socket bit Failure to use the correct size driver bit or socket bit will cause a reduction in the fastening torque. Bolt Even though the torque coefficient and the •...
  • Page 10 Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Phillips bit • Socket bit • Bit piece •...
  • Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 884397I229...

This manual is also suitable for:

Btd062

Table of Contents