Table of Contents
Advertisement
indicator
indicator
7
Notes:
● The water bucket must be correctly installed for the dehumidifier to operate.
● Do not remove the bucket while the unit is in operation.
● If you want to use a drain hose to drain water away, please install the hose
according to the section "Drainage method".
● Whenever a button on the control panel is pressed, a "beep" will sound.
● When the power is connected, the power indicator on the control panel will
turn on at the same time the dehumidifier emits a "beep".
Basic Functions of the Buttons
1
POWER Button
Press this button to turn the dehumidifier on or off.
+ / — Button
2
In the free drying mode, press these buttons to set humidity. Invalid
under other modes
● Pressing the « + » button will increase humidity while pressing the «—»
button will decrease humidity. The display range of humidity is 35%~80%.
Each press of a button will increase/decrease humidity by 5%.
● When setting Timer On or Timer Off, press these buttons to set the time.
For specific details, please refer to the Timer Button description below.
When the unit is in operation, holding the « + » and the « — » button
simultaneously for 3 seconds
4
3
space
indicator
indicator
proper place
5
6
1
5
operation
on indicator
indicator
Advertisement
Table of Contents
