Table of Contents
Advertisement
Selection of Installation Location
General Cautions
Each unit of the equipment should be placed by selecting the most convenient location such as
easy to install, operate or maintain.
(1) Each unit should be placed to make the piping and wiring length as short as possible and easy to install.
(2) Controller should be located within the reach of the user's hand for convenient daily operations (RUN, STOP, reset
warning, etc.). Do not locate the controller in a place easily accessed by the people other than the user.
(3) Install the refrigeration unit at a location easy to be serviced for daily maintenance and inspection.
Daily maintenance and inspection involves checking the operation pressure, compressor operation condition for
abnormal sound or vibration.
Location not disturbing neighbors
Avoid air-blow from the gas cooler to the neighbor's
window or noise to disturb other people.
Location away from a heat source
Installation should not be affected by reflection from the
floor.
Location not affected by a wet floor
Refrigeration unit is often affected by rainwater and drain
water from defrosting. Apply drain water work as required.
Location with a sturdy and level surface
Install the refrigeration unit on a firm foundation to avoid
an increase of noise and vibration.
Particularly at the boundary from the neighbor's lot,
comply with the regional laws and regulations.
Location with good ventilation
To ensure good ventilation, installed location should
ensure the intake air by the gas cooler is 43°C or below
with good airflow.
Location not affected by snow accumulation
Installation in a cold weather location should avoid snow
accumulation and attachment of frost or freezing by
furnishing a roof.
11
Advertisement
Table of Contents
