Error Messages; Related Documentation - Epson Stylus CX7000 Quick Manual

Epson stylus cx7000: product information
Hide thumbs Also See for Stylus CX7000:
Table of Contents

Advertisement

6. Close the scanner section, push in the output tray extension,
and close the output tray.
7. Repack the CX7000F Series in the original box using the
protective materials that came with it.
Keep the CX7000F Series level as you transport it.
After transporting the CX7000F Series, remove the tape
securing the print head, plug in the CX7000F Series, and turn
it on. If you notice a decline in print quality, clean the print
head (see page 15); if output is misaligned, align the print
head (see page 17).

Error Messages

Display message
Cause and solution
Paper out -> Load paper
Load or reload paper in the sheet feeder
into the sheet feeder,
and press the
then press the OK
continue (see page 4 for details).
button.
Paper jam -> Press the
Press the
OK button. Remove any
Remove any remaining jammed paper by
remaining jammed paper
hand.
by hand.
[C, M, Y, B]: Ink low ->
Ink is low in one or more of the indicated
Press the OK button to
cartridges (see page 15 for replacement
begin ink cartridge
instructions).
replacement.
Replace [Cyan, Magenta,
Ink is expended in one or more of the
Yellow, Black] ink
indicated cartridges (see page 15 for
cartridge -> Press the OK
replacement instructions).
button to begin ink
cartridge replacement.
No [Cyan, Magenta,
An ink cartridge is not installed or is
Yellow, Black] ink
installed incorrectly (see page 15 for
cartridge -> Press the OK
replacement instructions).
button to install a new ink
cartridge.
[Cyan, Magenta, Yellow,
An ink cartridge that is not supported by
Black] Ink cartridge error -
the CX7000F Series is installed (see
> Cartridge replacement
page 15 for replacement instructions).
is necessary. Press the
OK button to begin.
No memory card
A memory card is inserted that is not
supported by the CX7000F Series. Remove
the incompatible memory card and insert a
compatible card (see page 3 for details).
No photos on memory
The inserted memory card does not
card
contain any valid images (see page 3 for a
list of compatible card and image types).
No index sheet detected
An index sheet was not recognized
or sheet placed
because it is not positioned correctly. Align
incorrectly. Correct the
the top of the sheet with the left edge of
sheet placement and try
the glass (see page 8 for details).
again.
No photos selected or
No marks are detected on the index sheet
photos marked
or the sheet includes more than one mark
incorrectly. Select photos
for an image. Remove the index sheet,
correctly and try again.
mark it correctly, and try again (see page 8
for details).
x
Start Color/OK button to
x
Start Color/OK button.
Display message
Memory card data does
not match index sheet.
Replace the card or index
sheet and try again.
Fax not sent. Resend
using the Start B&W
button.
Paper thickness lever is
set for envelope printing.
Paper thickness lever is
set for printing sheets of
paper.
Service required. See
your documentation for
details.
Printer error -> or
Scanner error ->
See your documentation
and call service if
necessary.

Related Documentation

CPD-22471
CPD-22473
CPD-22472
10/06
Epson Stylus CX7000F Series
Cause and solution
The index sheet does not match the
photos on the memory card. Remove the
card and insert the one used to print the
index sheet (see page 7), or place the
correct index sheet on the glass (see
page 8).
x
You sent a fax using the
OK button to a fax machine that prints only
in black and white. Send the fax again (see
x
page 12), but press the
Start B&W
button.
The paper thickness lever is set to the
^
H position. If you are printing on
x
envelopes, press
Start Color/OK or
x
Start B&W to continue. Otherwise, set
m
the lever to the
L position.
The paper thickness lever is set to the
m
L position. If you are printing on paper
x
sheets, press
Start Color/OK or
x
Start B&W to continue. If you're
printing on envelopes, set the lever to the
^
H position.
A CX7000F Series part needs to be
replaced. Contact your local authorized
servicer or contact Epson for a referral.
There is a problem with the CX7000F
Series. Turn it off and then back on. If the
error does not clear, contact your local
authorized servicer or contact Epson for a
referral.
Epson Stylus CX7000F Series
Start Here sheet
Epson Stylus CX7000F Series
Basics Guide
Epson Stylus CX7000F Series
CD-ROM
(includes on-screen User's Guide)
Start Color/
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stylus cx7000f series

Table of Contents