Table of Contents
Advertisement
Epson Stylus CX7000F Series
5. Press the paper size button to select
.
5"x 7"
6. Connect the USB cable that came with your camera to the
camera and the
USB connector on the front of your
CX7000F Series.
7. Make sure your camera is
turned on. The following
appears on the display screen:
8. Select the photos you want to print with your camera. Then
adjust any necessary settings and print your photos as
explained in your camera manual.
Note:
Depending on the CX7000F Series settings and your digital
camera settings, some combinations of paper type, size, and
layout may not be supported. In addition, some of your digital
camera settings may not be reflected in the printed output.
Epson cannot guarantee the compatibility of any camera.
Connecting a Phone or Answering
Machine
If you're connecting the CX7000F Series to a phone line, and
connecting a telephone or answering machine to the same
phone line so you can use it to make voice calls, follow these
steps:
1. Connect the phone cable leading from the wall jack to the
port.
LINE
2. Connect one end
of another phone
cable to the
telephone or
answering
machine.
3. Connect the other end of the phone/answering machine
cable to the
port on the back of the CX7000F Series.
EXT
You also need to set up your CX7000F Series to receive faxes
manually (see page 13 for details).
10
,
, or
Letter
4"x 6"
PictBridge
10/06
Setting Up Your Fax Features
Before sending or receiving faxes, you may want to create a fax
header and select your fax preferences.
Creating Header Information
1. Press the
button once to
Fax
enter Fax mode. The
Fax
button lights up and you see
this display:
2. Press the
button. You
Setup
see this display:
3. Press the u or d button, or
press the
key on the numeric
6
keypad, to display this option:
4. Press the x
Start Color/OK
button. You see this display:
5. Press the x
Start Color/OK
blank except for the cursor (_).
6. Press the keys on the numeric keypad to enter up to 28
digits of header information. Use the number keys to enter
the letters A to Z (in uppercase or lowercase), the numbers 0
to 9, and various symbols.
Press a key repeatedly to display first the numbers and
symbols (if available), then the uppercase and lowercase
letters, as indicated on the key. Then wait a moment or
press the
button to move to the next character space.
r
When you're finished, press the
blank space.
Note:
If you need to change a character to the left, press the l key to
delete the character and re-enter it. Press the r key if you need
to move the cursor to the right.
7. Press the x
Start Color/OK
display.
1.Fax Header Setup
8. Press the u or d button, or
press the
key on the numeric
2
keypad, to display this option:
9. Press the x
Start Color/OK
button. You see this display (to
indicate the two-digit month,
day, and year):
10. Press the keys on the numeric keypad to enter the date. You
can enter the numbers 0 to 9.
11. Press the x
Start Color/OK
button. You see this display (to
indicate the hour and minute):
Enter Fax Number
1.Select Speed D
6.Header & Time
1.Fax Header Set
button again. The display goes
button to move to a
r
button. You return to the
2.Date/Time
MM:DD:YY
HH:MM AM
Advertisement
Table of Contents
