Osd Controls - Lenovo ThinkVision P40w-20 User Manual

OSD controls

2-2 P40w-20 Curved Panel Monitor User's Guide
The settings adjustable with the user controls are viewed through the On-Screen Display (OSD),
as shown below.
To use the controls:
1.
Press to open the main OSD menu.
2.
Use or to move among the icons. Select an icon and press
If there is a sub-menu, you can move between options using
select that function. Use
3.
Press to move backwards through the sub-menus and exit from the OSD.
4.
Press and hold for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold
adjustments to the OSD.
5.
Enables DDC/CI by default. Use OSD Exit Key, press and hold the
seconds to disable/enable DDC/CI function. The words " DDC/CI
Disable/DDC/CI/Enable" shows on the screen.
6. The ENERGY STAR option resets all user settings to default values so that the monitor can
meet the requirements of Energy Star.
or to make adjustments. Press
for 10 seconds to unlock the OSD and allow
to access that function.
or , then press to
to save.
buttons for 10