Chapter 2. Explore your monitor
Quick access controls
This section describes the user control features used to adjust your monitor image.
The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Table 2-1 Direct access controls
No. Icon
Control
1
One Key Switch
Exit
DDC-CI
2
Input change
Up/Increase
3
Brightness
Down/Decrease
4
Main menu
Enter
*Note:
One Key Switch:
Press
Press
and select "2" to be HDMI /DP port USB-B function.
Description
Select "1" is Thunderbolt™ port USB-C function.
Select "2" is HDMI /DP port USB-B function.
Exit from menu and return before menu.
Press and hold for 10 seconds to enable or disable
the DDC-CI function.
Switches the video input source.
Press to move lighting-indicator on main menu up
from active item to last one.
Press to increase current values on adjustment bar.
Direct access to Brightness adjustment.
Press to move lighting-indicator on main menu down
from active item to next one.
Press to decrease current values on adjustment bar.
Open OSD main menu. Press and hold for 10
seconds will lock menu/un-lock menu.
Press to enter next level on main menu/sub menu
status or enter previous level on adjustment bar.
and select "1" to be Thunderbolt™ port USB-C function.
Chapter 2 Explore your monitor 2-1