Listening to the memorised station
You can store 40 AM and FM stations in memory and recall them at the push of a but-
ton. (Preset tuning)
1
Tune in the desired station and
press the ENTER button.
! For FM stations, stereo and mono modes are memorised.
! Store the stations in memory, in order, starting with preset channel 1.
2
Within 5 seconds, press the TUNER
PRESET (
or
) button to select
the preset channel number.
3
Within 5 seconds, press the ENTER
button to store that station in mem-
ory.
! Repeat steps 1 - 3 to set other stations, or to change a preset station.
! When a new station is stored in memory, the station previously memorised will
be erased.
To recall a memorised station:
Press the TUNER PRESET (
or
) button to
select the desired station.
To select a preset station with the direct number buttons:
1
Press the corresponding number ("0" - "9").
2
Press the ENTER button.
For example, to choose 28
1
Press the "2" button.
2
Press the "8" button.
3
Press the ENTER button.
! Press buttons within 5 seconds.
! To correct, enter the number again.
To erase all the contents of the preset memory:
1
Hold the CLEAR button down for 4 seconds or
more.
2
Within 10 seconds, press the ENTER button.
Note:
The backup function protects the memorised stations for a few hours should there be
a power failure or the AC power lead disconnection.
04/2/9
SD-PX15H_SEEG_E.fm
SD-PX15H
ENGLISH
Preset channel number
Preset channel number
E-38
TINSZA052AWZZ
D
F
S
V
I
N
P
E