Table of Contents
Advertisement
Listening to the memorised station
" Memorising a station
You can store 40 AM and FM stations in memory and recall them at the push of a
button. (Preset tuning)
1
Perform steps 1 - 3 in "Listening to the radio" on page 16.
2
Press the ENTER button to enter the preset tuning saving mode.
3
Within 5 seconds, press the TUNER
PRESET (
or
) button to select
the preset channel number.
Store the stations in memory, in order, starting with preset channel 1.
4
Within 5 seconds, press the ENTER
button to store that station in mem-
ory.
5
Repeat steps 1 - 4 to set other stations, or to change a preset sta-
tion.
When a new station is stored in memory, the station previously memorised will
be erased.
Note:
The backup function protects the memorised stations for a few hours should there be
a power failure or the AC power lead disconnection.
" To recall a memorised station
Press the TUNER PRESET (
or
) button to select the desired sta-
tion.
Preset channel
To select a preset station with the direct number buttons:
Stations 1 - 10:
Press the corresponding number ("1" - "10/0").
Stations 11 - 40:
Press the ">10" button and then the memorised preset number.
For example, to choose 28
1 Press the ">10" button.
2 Press the "2" button.
3 Press the "8" button.
Press buttons within 5 seconds.
" To erase all the contents of the preset
memory
1 Hold the CLEAR button down for 3 seconds
or more.
2 Whilst "CLEAR" is displayed, press the EN-
TER button.
02/11/8
SD-AT50W(A)2.fm
SD-AT50W
Frequency and frequency band
17
Advertisement
Table of Contents
