Table of Contents
Advertisement
Bluetooth one touch connection via NFC (continued)
NFC connection for audio playback
Check that:
Your device (smartphone / tablet) has an NFC function.
NFC function on your device is turned on.
Screen lock function of the device is off.
This unit is not in Eco mode.
1
Touch your device to the NFC detection area on the
sound bar or supplied NFC tag.
NFC detection area
2
A pop-up window asking whether to proceed with the
Bluetooth connection appears on the device. Select
<YES>.
The 'connected' message appears when the connec-
tion is complete.
Listening to Bluetooth enabled devices
Bluetooth
Bluetooth wireless technology is a short-range radio
technology that enables wireless communication between
various types of digital devices, such as mobile phone
or computer. It operates within a range of about 32 feet
(10 meters) without the hassle of having to use cables to
connect these devices.
This unit supports the following:
Communication System: Bluetooth Specification version
2.1 Bluetooth + Enhanced Data Rate (EDR).
Support Profile : A2DP (Advanced Audio Distribution Profile)
and AVRCP (Audio/Video Remote Control Profile)
Notes when using unit with a mobile phone
This unit cannot be used to talk over the telephone even
when there is a Bluetooth connection made to a mobile
phone.
Please refer to the operating manual supplied with the
mobile phone for details on operation of your mobile
phone while transmitting the sound using a Bluetooth
connection.
3
Bluetooth operation buttons (remote control only)
NFC tag
Or
Notes:
Bluetooth devices need to be initially paired first before they
can exchange data. Once paired, it is not necessary to pair
them again unless:
E-17
Playback will start automatically. Otherwise, press
play (on remote control or source device).
Sound will be heard from the speakers of this unit via
audio streaming.
Your device must be within 32 feet (10 meters) from
the sound bar.
Press to play or pause.
Press to skip up.
Press and hold to fast forward.
Press once to restart the current track.
Press twice to skip down.
Press and hold to fast reverse.
To disconnect, simply touch your device to the NFC
detection area on the subwoofer or NFC tag again.
To listen to audio via Bluetooth connectivity without
NFC tag - refer "Pairing with other Bluetooth source
devices" on page 18.
It takes about 6-8 seconds for a Bluetooth enabled device
(eg. smartphone) to establish Bluetooth connection with
this unit via NFC or manual connection.
Pairing Bluetooth devices
Pairing is made with more than 20 devices. Pairing can
only be made one device at a time. This unit can be
paired to a maximum of 20 devices. If subsequent device
is paired, the oldest device paired, will be deleted and
replaced with the new one.
This unit is reset. All pairing information is deleted when
unit is reset.
Pairing information is deleted while re-pairing, etc.
Advertisement
Table of Contents
