Sharp SD-PX15H Operation Manual page 61

In the stop mode, you can change the amplifier settings on the TV
screen.
1
Set the MODE 1/MODE 2 switch to MODE
2 and press the AMP SET UP button.
! The amplifier setting screen appears.
! "CROSSOVER" (amplifier setting) cannot be
selected.
2
Press the or button to select the menu and press the ENTER
button.
3
Press the , , or button to change the
setting and press the ENTER button.
(The number of repetition depends on the setting item.)
! To change other settings, begin from step 2.
! "SUB WOOFER" (speaker size) cannot be selected.
4
Press the RETURN button twice.
The setting is complete.
Note:
You cannot change the amplifier settings unless the input source is set to DVD/CD.
AMPLIFIER SETUP
SPEAKER SIZE
SPEAKER DELAY
SPEAKER LEVEL
TEST TONE
CROSSOVER
SELECT
ENTER ENTER RETURN
SPEAKER SIZE
FRONT SMALL
CENTER SMALL
SURROUND SMALL
SUB WOOFER YES
SELECT CHANGE
RETURN
Repeat the operation as instructed.
04/2/9 SD-PX15H_SEEG_E.fm
SD-PX15H
ENGLISH
D
F
S
V
I
N
P
E
E-54
TINSZA052AWZZ